滴定/水分/イオンクロマトグラフィー/近赤外分析計/ラマン分光計/ポテンショスタット/ガルバノスタット/プロセス分析計
アプリケーション検索(技術資料)
※ 並び替えをz-a 順にすると、概要を日本語に訳したアプリケーションが上位に表示されやすくなります。
※ PDFドキュメントは英語版と日本語訳版の両方が混在しています。
※「Japanese」というキーワードを入力すると、日本語訳版だけが表示されます。
- 410000002-B携帯型ラマンスペクトロメーターを使用したカーボンブラックのアットライン特性評価
この論文では、カーボンブラックのアットライン特性評価に有効なツールとしての携帯型ラマン分光装置を紹介しています。カーボンブラック材料の特性評価の有効なテストになり得ます。
- 410000033-A岩石鉱物学の剥片分析におけるマイクロラマン分光装置
岩石の剥片における鉱物相の正確な識別は、岩石の記述的岩石学的および成因的岩石学的分析に不可欠です。光学顕微鏡に組み合わされた携帯型ラマンは、従来使用されてきた光学顕微鏡法よりも、識別により高い確実性を与える光学画像と共に、化学的な情報を伝えます。
- 410000038-A濃褐色のPV袋越しの材料ID
このテクニカルノートは、濃褐色のビニール袋越しにNanoRam材料識別を行うためのものです。NanoRamが濃褐色ポリ塩化ビニル内における材料識別作業を示します。
- 410000040-Aハンドヘルドラマン測定のためのサンプリングガイドライン – 知っておくべきこと
ハンドヘルドラマンは、様々なタイプおよび形状のサンプルの原材料検査に使用されます。最適化されたサンプリングの付属品は、データ品質の妥協も複雑な検査もすることなく、ハンドヘルドラマンの有用性を向上させます。
- 410000047-ANanoRam-1064 Fast Fact(短い説明): セルロースとその誘導体の原料の検証
セルロースは、大半の医薬品に見られる一般的な自然由来の賦形剤です。消費者に良質のセルロースとその誘導体を提供することを保証するため、原料の検査が求められます。NanoRam®-1064 は、785 nm レーザーを用いた典型的なハンドヘルドラマンシステムによって生成された蛍光を最低限に抑える、医薬品の識別テストのために有用なものです。同様に、ここでは NanoRam®-1064 は、785 nm レーザーによって通常蛍光を発するセルロース誘導体を識別するのに用いられます。
- 410000048-AAモード: TacticID®-GP Plus ハンドヘルドラマンシステムによる上級ユーザーのためのカスタマイズ可能なライブラリ機能
TacticID®-GP Plus は、ユーザーの安全性と安心感をサポートする多様な測定モードを有しています。Aモードにより、ユーザーは、スペクトル探索範囲とヒットクオリティインデックス (HQI) の閾値をカスタマイズできるラマンもしくは SERS スペクトルのライブラリを作成することができます。Aモードは、地域特有のデザイナードラッグの SERS 検知の拡大に活用したい法医学研究所、あるいは未来志向の市場における食品の安全性に役立ちます。この例では、Aモードは、シングルインジケータピークを用いて調製粉乳中のメラミンの存在を容易に検出するためのメラミンのSERSライブラリを作成するのに用いられます。
- 410000049-ANanoRam®-1064 Fast Facts: Botanical Verification
Botanicals are derived from plant materials and used for their medicinal and therapeutic properties in the nutraceuticals market. They are not as heavily regulated by the U.S. Food and Drug Administration (FDA) like the pharmaceuticals drug market, but they are required to follow Good Manufacturing Practice (GMP Requirements).The NanoRam®-1064 is an asset for pharmaceutical identity testing, minimizing fluorescence generated by typical handheld Raman systems with 785 nm lasers. As such, the NanoRam®-1064 is used here to identify botanicals that would normally fluoresce with a 785 nm laser.
- 410000050-Aラマン分光計による歴史上の切手のインクの迅速な測定
歴史的インクの偽造は増加しているので、不正な切手を識別できるようにし、市場から取り除くことは絶対に必要です。インクの蛍光を最小化することから、1064 nmレーザーの携帯型ラマンi-Raman EX®が用いられます。またi-Raman EX®は、サンプルの燃焼を防ぐための1%までの低レーザー出力低減機能を有しており、ラマンビデオマイクロスコープシステムはごく詳細まで分析することができるため、1885年の歴史上重要な封筒の文化遺産の分析のために不可欠です。
- 410000051-B顕微ラマン分光計によるマイクロプラスチックの測定
分光技術はポリマーの識別に適しており、実験室の顕微ラマン分光計は、共焦点ラマン顕微鏡やフーリエ変換赤外(FTIR)顕微鏡の代替として、ポリマー材料の迅速な識別に使用されます。この技術資料では、非常に小さなマイクロプラスチック粒子の同定にラマン顕微鏡を使用しました。
- 410000052-ASee-Through Measurements of Illicit Substances in Commercial Containers with the TacticID®-1064 ST
The TacticID®-1064 ST is a 1064 nm handheld Raman system designed for law enforcement officials, first responders, and customs and border protection officers for rapid field identification of illicit substances such as narcotics, explosives, and other suspicious materials.The TacticID-1064 ST is specially designed with see-through Raman functionality to measure materials through both transparent and opaque containers. These through-barrier measurements remove the need for active sampling of potentially dangerous compounds such as fentanyl, leading to safer operations and reduced wait time for clear results.
- 410000061-AIdentification of Starting Materials in Pharmaceutical industry using STRam®-1064
100% starting materials identification testing is one of the FDA’s directives as per 211.84 for FDA regulated industries such as Pharmaceutical, Vaccines, Cosmetics, Tobacco, Animal veterinary products, Food, etc. STRam®-1064 is a Raman analyzer uniquely suited for this purpose. It measures samples through thick packaging materials such as plastics, multilayer kraft paper sacks, and HDPE containers. A long wavelength laser is used to suppress fluorescence. The ID algorithm isolates the sample signature by subtracting that of the packaging material and compares that with library spectra to achieve identification.
- AN-NIR-083Quality Control of HDPE, LDPE, and PP
Identification of individual polymers with FT-IR spectroscopy can be a challenge due to sample inhomogeneity especially when larger sample sizes need to be analyzed. This application note demonstrates that the DS2500 Solid Analyzer operating in the visible and near infrared spectral region (Vis-NIR) provides a reliable and fast solution for the identification of high-density polyethylene (HDPE), low-density polyethylene (LDPE), and polypropylene (PP). With no sample preparation or chemicals needed, Vis-NIR spectroscopy allows the identification of larger inhomogeneous sample amounts in less than a minute.
- AN-NIR-118Quantification of cotton content in textiles by near-infrared spectroscopy
This Application Note demonstrates how the OMNIS NIR Analyzer Solid quickly determines the cotton content in various textile products within just 30 seconds.
- AN-NIR-124Polyethylene content determination in polypropylene pellets by NIRS
Polypropylene and polyethylene can pose recycling challenges. With near-infrared spectroscopy (NIRS), users receive polyolefin composition results in seconds.
- AN-PAN-1061NIRによる小麦粉製造工程のインライン計測
この技術資料では、メトローム社の2060 the NIRアナライザーを用いた近赤外(NIR)分光法による小麦粉製造工程におけるジャガイモ澱粉混入の存在のインライン計測について紹介します。この2060 the NIRアナライザーは、この用途のために特殊に設計された拡散反射プローブによるジャガイモ澱粉の迅速、試薬なし、非破壊分析を可能にします。その計測結果は迅速に得られ、化学試薬は一切不要です。
- AN-RS-005Differentiation of inorganic salts using Raman spectroscopy
This Application Note documents the suitability of hand-held Raman spectrometers, e.g., the Mira M-1, for the identification and differentiation of salts such as carbonates, phosphates, and sulfates. The focus of the work was the rating of the influence of the cationic part and of the crystal water on the Raman spectroscopy identification of the salts.
- AN-RS-006Differentiation between isopropyl alcohol from various manufacturers
This Application Note shows the rapid, non-destructive identification of isopropyl alcohol from two manufacturers using Raman spectroscopy following the creation of a suitable library. The measurements with the hand-held Raman spectrometer Mira M-1 require no sample preparation and provide immediate results that identify the samples unambiguously.
- AN-RS-007Identification of polymer masterbatches with Raman spectroscopy
Handheld Raman spectroscopy enables rapid polymer masterbatch analysis, while Metrohm’s XTR® algorithm mitigates fluorescence interference for accurate additive identification.
- AN-RS-013容器内容物の同定
危険な状況において、現場での未知試料の同定は重要なカギになり得ます。迅速に、しかし慎重に、その対象物質についてできる限り多くの情報を得ることが不可欠です。未知の試料を扱うときには安全が最優先されます。その物質の有毒性、レーザー光線による発火性、環境への危険性等に配慮する必要があります。専門家からの情報を迅速に得られればいいですが、通常現場にはそのような専門家はいません。 このアプリケーションノートでは、容器の危険な内容物を同定するための Mira DS と iUA の使用について、ガイド付きワークフロー、コンテンツ ID のスペクトルおよび同定結果の例を含めて説明します。iUAとMira DSを使用すれば、サンプルに触れることなく、数秒で安全な結果が得られます。
- AN-RS-034ラマン分光計におけるオービタル水平走査スキャン(ORSTM)技術
ラマン分光システムは、サンプルが均質であれば、小さなレーザースポットと同程度のアパーチャーで高分解能のスペクトルを収集することができます。しかし、実際はもっと複雑です。混合サンプル中の全成分を同定するためには、より広い面積での測定が必要となります。そのためには、レーザーのスポットサイズを大きくして、より広い範囲をカバーすることが求められます。しかしながら、分解能を上げるにはアパーチャーを小さくする必要があり、ラマン光を集めにくくなるため、感度が低下してしまいます。解決策として小さなアパーチャーを用いて、集光したレーザーを試料上で素早く移動(ラスター)させ、試料の広い範囲から情報を収集する手法があります。 メトロームラマン社が開発したオービタル水平走査テクノロジー(ORSTM)は、このような原理を応用して開発されたものです。 ORSは、低解像度、低感度、サンプルの劣化といった問題を解決し、サンプルの広い面積を測定するメトロームラマン社独自の技術です。本記事では詳しくさまざまな用途を紹介します。
- AN-RS-037A Deeper Look at 785 nm Raman
- AN-RS-041Discriminating counterfeit beer with Raman spectroscopy and PCA
Currently, there are no simple tests to identify counterfeit beer. This Application Note demonstrates the ability of i-Raman EX, the B&W Tek Laboratory Raman instrument with a 1064 nm laser, with principal component analysis (PCA) to distinguish between beers from different brewers and from a mixture of beers.
- AN-RS-044Optimize raw material identification and verification (RMID) with MIRA P
This Application Note explains how to scale MIRA P usage across an entire manufacturing operation by transferring models between different MIRA P instruments.
- AN-RS-045Transition RMID Operations Between Handheld Raman Devices
This application shows how to seamlessly transition from Metrohm’s NanoRam 785 to the newer MIRA P system, ensuring continuity in raw material identification (RMID).
- BWT-4903NanoRamハンドヘルドラマンスペクトロメーター: 医薬品産業で使用される原材料および化学薬品の検査に最適
TE冷却スペクトロメーターと、小さいタッチスクリーン操作ユニットにパッケージされた、特許取得済みCleanLazeテクノロジーが搭載されたNanoRamハンドヘルドラマンは、医薬品メーカーに高品質の原材料検査機能を提供します。
- BWT-4905NanoRam 携帯型ラマン分光計:医薬品産業向け原材料・化学薬品検査のための完全規制遵守した測定法とは
NanoRam は、医薬品製造工程で使用される化学薬品の迅速な受け入れ検査向けの最先端ラマン分光計です。医薬品向けに設計された装置のため、世界中の主要な規制に完全準拠しています。この技術資料では、規制遵守されたNanoRamを解説しています。
- BWT-4911製造に用いられる材料におけるリスクを低減するためのハンドヘルドラマンの使用
ラマン分光装置は、原材料の識別のために迅速な特定分析を提供する貴重なツールであり、製造において標準以下または不適切な材料使用のリスクを低減します。ハンドヘルドラマンの実用性は、生産性と、生産プロセスにおいてボトルネックを生じさせることなく完全な検査を行う能力を向上させます。企業のデータマネジメントシステムへのラマンデータの統合は、転記の誤りおよびデータ損失のリスクを減らすとともに データと結果処理の安全な手段を提供します。
- EB-004Near-infrared and Raman spectroscopy for polymer analysis: An introduction
This e-book explains how Raman and near-infrared (NIR) spectroscopy enable rapid, nondestructive polymer analysis, ensuring high quality while reducing costs and waste.
- WP-054QC ラボにおける効率性の向上: いかにNIRSが90%までの費用削減に役立つか
品質管理 (QC) プロセスの過小評価は、内部および外部の製造不良を引き起こす主な要因の1つであり、売上高の10~30%のロスにつながると報告されています。その結果、メーカーをそのQCプロセスによってサポートするために多くの様々な基準が制定されています。しかしながら、結果が出るまでの時間と関連する化学薬品のための費用は極めて過大となることがあり、そのため多くの企業がそのQCプロセスで近赤外分光法 (NIRS) を実行することになります。この文書では、NIRSの潜在能力が解説され、最高90%までの経費節約の可能性が示されています。