滴定/水分/イオンクロマトグラフィー/近赤外分析計/ラマン分光計/ポテンショスタット/ガルバノスタット/プロセス分析計
アプリケーション検索(技術資料)
※ 並び替えをz-a 順にすると、概要を日本語に訳したアプリケーションが上位に表示されやすくなります。
※ PDFドキュメントは英語版と日本語訳版の両方が混在しています。
※「Japanese」というキーワードを入力すると、日本語訳版だけが表示されます。
- 8.000.6059Determination of hazardous substances in electrical and electronic equipment
The Restriction of Hazardous Substances (RoHS) Directive 2002/95/EC stipulates maximum limits for the hazardous metals cadmium, lead and mercury as well as the hexavalent chromium and the brominated flame retardants in electrical and electronic products. To ensure compliance, reliable analysis methods are required.This poster deals with the wet-chemical determination of trace concentrations of the six RoHS-restricted substances in a wide variety of materials including metals, electrotechnical components, plastics and wires. After sample preparation according to IEC 62321, the metals lead, cadmium and mercury are best determined by anodic stripping voltammetry (ASV) and the flame retardants PBB and PBDE are quantified by direct-injection ion chromatography (IC) using spectrophotometric detection. Chromium(VI) can be determined either by adsorptive stripping voltammetry (AdSV) or IC. Both methods are very sensitive and meet prescribed RoHS limits.
- 8.000.6084Spectroelectrochemical analysis of a N-aryl-D2-pyrazoline derivative
By combining the information from electrochemical and spectroscopic techniques, UV/VIS spectroelectrochemistry (UV/VIS-SEC) allows a comprehensive analysis of electron-transfer processes and complex redox reactions. The anodic oxidation of a N-aryl-D2-pyrazoline derivative was investigated by combining cyclic voltammetry and UV/VIS spectroscopy. In-situ measured UV/VIS absorbance depicted the absorption changes that accompanied the anodic oxidation and could therewith prove the stability of the electrogenerated radical cation. UV/VIS-SEC provides a powerful tool for the in situ study of shorter-lived species, reaction mechanims, and kinetics in a wide variety of electrochemical active organic, inorganic, and biological molecules.
- AB-057Polarographic determination of nicotine
The quantitative determination of the alkaloid nicotine, which is an essential constituent of the tobacco plant, can be carried out by polarography. The quantification limit is less than 0.1 mg/L in the polarographic vessel.
- AB-073Polarographic analysis – half-wave potentials of organic substances
This Bulletin is a supplement to Application Bulletin no. 36 (Half-wave potentials of inorganic substances) in the sense that the half-wave potentials of 100 different organic substances are listed. At the same time the supporting electrolytes used and the limits of determination are given.The various substances are listed in alphabetical order. The most important polarographically active functional groups are taken into consideration. This means that substances for related structures can also be determined polarographically in the same or similar supporting electrolytes, although they may not appear in the list.Unless otherwise stated, the half-wave potentials refer to a temperature of 20 °C, and the potentials are given in volts, measured with a sat. KCI-Ag/AgCl electrode assembly.The determination limits give the smallest concentrations which can be measured without risking serious errors in the results. In all cases, the limit of detection lies below the limit of determination.
- AB-136Polarographic determination of styrene in polystyrene and copolymers
This Application Bulletin describes a simple polarographic method to determine monomeric styrene in polymers. The limit of determination lies at 5 mg/L. Before the determination, styrene is converted to the electrochemically active pseudonitrosite using sodium nitrite.
- AB-190ポーラログラフィーによるテレフタル酸中の4-カルボキシベンズアルデヒドの測定
4-カルボキシベンズアルデヒド (以下4-CBA) は、アンモニア性溶液において滴下水銀電極 (DME) で直接還元することができます。ごく簡単なサンプル前処理後、ポーラログラフィーによってppmを下回る範囲まで、テレフタル酸中の4-CBA濃度を迅速かつ正確に測定することが可能です。
- AB-213ポーラログラフィーによるニコチン酸アミドの測定
このApplication Bulletinでは、ビタミンB群の1つであるニコチン酸アミド (ビタミンPP) の測定について説明しています。溶液 (フルーツジュースなど)、ビタミンカプセルおよびマルチビタミン剤における測定のための手引きが示されています。測定の直線性の範囲も指定されています。ニコチン酸アミドの検出限界はおよそ 50 μg/L です。
- AB-215ポーラログラフィーによる葉酸の測定
このApplication Bulletinでは、ビタミンB群の1つであり、ビタミンB9またはBCとして知られる葉酸の、ポーラログラフィーによる測定について説明されています。溶液 (フルーツジュースなど)、ビタミンカプセルおよびマルチビタミン剤における測定のための手引きが示されています。測定の線形範囲も指定されています。葉酸の検出限界はおよそ 75 μg/L です。
- AB-218ポーラログラフィーによるチアミン (ビタミンB1) の測定
このApplication Bulletinでは、チアミン (ビタミンB1) のポーラログラフィーによる測定について説明しています。この手順により、モノビタミンの製剤における分析が可能となります。測定の線形範囲も示されています。チアミンの検出限界はおよそ 50 µg/L です。
- AB-219ポーラログラフィーによるリボフラビン (ビタミンB2) の測定
このApplication Bulletinでは、リボフラビン (ビタミンB ) のポーラログラフィーによる測定について説明されています。この手順により、モノビタミンの製剤における分析が可能となります。測定限界はおよそ 100 μg/L です。
- AN-C-127Benzylamine in a beta blocker
Determination of benzylamine in a beta blocker (Nebivolol) using cation chromatography with direct conductivity detection. A step gradient for fast elution of the main component is applied.
- AN-C-176陽イオンクロマトグラフィー後の UV/VIS 検出による動物用飼料のおがくずに含まれるメラミンの測定
木くずおよびおがくずは、反芻動物などの飼料の製造に良く用いられます。木工用接着剤に含まれる樹脂の原材料であるメラミンは、飼料においてその使用が制限されています。そのため、おがくずに含まれるメラミン濃度は分析する必要があります。メラミンは、UV/VIS 検出を伴うイオンクロマトグラフィー分離の後に測定されます。
- AN-EC-033Utilizing hyphenated EC-Raman to study a model system
This Application Note presents a walkthrough of an experiment on 4-nitrothiophenol using hyphenated EC-Raman, a combination of Raman spectroscopy and electrochemistry.
- AN-H-024Determination of tar acids (phenolics) in tar products
Determination of tar acids in coal tar products. This procedure may also be applied to the determination of a range of weakly acidic organic compounds such as carboxylic acids, hydroxy acids, phenols, phenolic acids, keto-enols, imides, and aromatic nitro compounds.11 Vaughan, G. A. Thermometric and Enthalpimetric Titrimetry. Van Nostrand Reinhold Co. Ltd (1973)
- AN-H-129Determination of weak bases in nonaqueous media through catalyzed thermometric endpoint titration (CETT)
Weak, organic bases that are soluble in nonaqueous solvents (including nonpolar solvents) are determined in glacial acetic acid using titration with strong acids, e. g., anhydrous perchloric acid or trifluoromethanesulfonic acid. The endpoint of such titrations can be determined thermometrically, insofar as a suitable thermometric endpoint indicator exists. The exceptional suitability of isobutyl vinyl ether (IBVE) as indicator has been demonstrated.
- AN-I-025窒素の測定によるルシゲニンの純度測定 - 標準添加による迅速かつ安価な測定
ルシゲニンは最も頻繁に使われる化学発光試薬の1つであり、例えばスーパーオキシドアニオン基の存在指標などとして用いられることがあります。ルシゲニンは購入するには比較的高価でありますが、その合成はアクリダノンから出発する2段階の合成を含むのみです。1段階目にはメチル化が含まれ、2段階目の形態は最終的に硝酸ルシゲニンに変換される塩化ルシゲニンです。合成されたルシゲニンの純度を確認するため、硝酸塩選択性電極を用いてイオン測定が実施されます。これは、イオンクロマトグラフィーなどといった競い合うメソッドと比較すると、迅速かつ安価なメソッドであります。
- AN-N-066Four phenols in tap water using amperometric detection
Determination of phenol, m-cresol, 2,6-dimethylphenol and 2,3,6-trimethylphenol in tap water with amperometric detection using a glassy carbon electrode.
- AN-NIR-008近赤外分光法を用いた木材パルプ中のリグニンの測定
近赤外分光法(NIR)を用いて木材パルプ中の残留リグニン含有量を測定する方法について説明しています。リグニンおよびセルロースの主な吸収ピークを二次微分スペクトルで利用することにより、製紙工程中における木材パルプ中の残留リグニン含有量をモニタリングすることが可能です。
- AN-NIR-022近赤外分析計 (NIR) によるガソリンの分析 (セタン指数、TAN、芳香族、硫黄など)
本アプリケーションノートでは、近赤外分析計によるガソリンのセタン指数、芳香族含有量、臭素価、TAN(全酸価)、硫黄含有量の測定について記述します。
- AN-NIR-025ジェット燃料係数のインライン測定のリアルタイム予測
この Application Note では、近赤外線分光法を使用した、ジェット燃料としてのケロシンの特性化のための様々な、大部分はASTMおよびISOに準拠した指数の測定について述べられています。NIRS XDS Process Analyzers を使用して、次のパラメータが測定されました: 米国石油協会(API)に従った密度、芳香族、セタン指数、ASTM D86による沸騰特性、引火点、凝固点、粘度、水素含有量。これらすべてのパラメータの測定がたった1回の測定によって迅速・簡単に行われます。
- AN-NIR-027化粧品および薬品産業のための46種の薬用植物および芳香植物の認証
この Application Note では、Vis-NIR 分光法および特別な植物ライブラリーによって、Organicum majoricum や Tilia cordataなどの46種の様々な薬用植物および方向植物をそのスペクトルに基づいてどのように楽に確定できるかを説明しています。手間がかかり、また経験を積んだ研究者を必要とするその他代替の方法と比較して、VIS-NIR分光法は迅速で簡単な確定が可能です。
- AN-NIR-029水溶性ワニス中のブチルグリコールおよびプロピルヘプチルアルコール
この Application Note は、Vis-NIR 分光法を用いた水溶性ワニスに含まれる2種の重要な添加物、すなわちブチルグリコールとプロピルヘプチルアルコールの測定について説明しています。この両添加物に加え、ワニスに含まれる他の成分も測定することができます。
- AN-NIR-075可視近赤外分光法による土壌中のナフサの測定 - 試験所におけるナフサのテストのための簡単なソリューション
ナフサは、原油またはコールタールの蒸留過程で最初に生成される石油製品です。これは、主にガソリン製造の基本材料として、あるいは溶媒として用いられます。世界中の多くの場所で、事故による流出が定期的に起こっており、土壌汚染を引き起こしています。汚染地域の調査は、通常ガスクロマトグラフィーを用いて行われ、分析前に土壌サンプルを凍らせ、粉砕し、その後抽出する必要があります。可視近赤外分光法を用いることでこのようなサンプル前処理のステップは全く不要となるため、このメソッドは実行可能で迅速かつ使いやすい代替法となります。
- AN-NIR-114Determination of RON, aromatics, benzene, olefins, and density in reformate by NIRS
The determination of key quality parameters of reformate—namely research octane number (RON, ASTM D2699-19), aromatic content (ASTM D5769-15), benzene content, olefin content, and density—requires time-consuming and laborious conventional methods. In contrast, the Metrohm DS2500 Liquid Analyzer can measure all of these parameters, providing results within one minute without any sample preparation.
- AN-O-025Sorbate and benzoate in functional drinks
Determination of sorbate and benzoate in a functional drink using ion-exclusion chromatography with suppressed conductivity detection.
- AN-P-035Four phenols in tap water by amperometric detection
Determination of phenol, m-cresol, 2,6-dimethylphenol, and 2,3,6-trimethylphenol in tap water using amperometric detection and a glassy carbon electrode.
- AN-P-053Amperometric detection for the determination of catecholamines in pharmaceutical products
Traditionally, catecholamines are separated using reversed-phase chromatography followed by amperometric detection. This Application Note describes the determination of catecholamines in an emergency medication for life-threatening allergic reactions.
- AN-PAN-1027ASTM D4590 に準ずるスチレン中の4-tert-ブチルカテコールの監視
スチレンは環境温度にて重合するため、輸送や保管の際には4-tert-ブチルカテコール (TBC) にて安定させなければなりません。スチレン中の TBC 濃度は、10 ~ 15 mg/L に収まるべきとされています。測光分析のための Metrohm Applikon のプロセスアナライザーは、最適な保管環境下で、スチレン中の TBC 濃度が不足しないよう保ちます。メソッドはASTM D4590 を基礎としています。
- AN-PAN-1035繊維染色槽内のインディゴ、ハイドロサルファイト、その他のパラメーターのオンライン分析
インディゴは、その分子の大きさのために合成繊維に染色するのが困難です。一方、セルロース繊維は木綿などのようにより大きな間隙を有するため、インディゴ分子も問題無く吸収します。インディゴは非水溶性であるため、まず強アルカリ性の染色槽で亜硫酸ナトリウム溶液によって水溶性のロイコインディゴに還元されます。良い染色結果を得るためには、染色槽をよく換気することが必要ですが、酸素が混入しないように注意しなければなりません。インディゴが繊維の細胞間隙に定着するよう、生地は染色槽での浸漬工程間に空気酸化されなければなりません。しっかり染色するためには、浸漬工程を繰り返す必要があります。高い染色クオリティを得るためには、正確なNaOHドージングのための pH 値をはじめ、ハイドロサルファイト濃度やインディゴ濃度、染色槽の温度から、その還元電位に至るまで、数多くのパラメーターを監視し、制御しなければなりません。
- AN-PAN-1045Online monitoring of copper corrosion inhibitors in cooling water
Copper is used widely in industrial cooling water systems for its heat transfer properties, although it is susceptible to corrosion. Corrosion can cause a loss of efficiency and eventually a failure of equipment, leading to costly maintenance, replacement, and downtime. Corrosion inhibitors (triazoles) can be added to the water chemistry, which form sparingly soluble protective layers on the surface of the metal. Triazole concentrations must be maintained to protect the copper, which necessitates regular concentration determinations in cooling water. The 2060 IC Process Analyzer with UV/VIS detection is well-suited for this application, able to precisely and reliably measure multiple ionic and UV-active compounds simultaneously in cooling water.
- AN-RS-008Identification of monomers with Raman spectroscopy
Raman spectroscopy can easily monitor polymerization by tracking monomer consumption and polymer formation, providing a valuable tool for polymer manufacturers.
- AN-S-006Hypophosphite, phosphate, and organic acids in ethylene glycol
Determination of hypophosphite, formate, phosphate, adipate, p-nitrobenzoate, and sebacate in ethylene glycol using anion chromatography with conductivity detection after chemical suppression.
- AN-S-057Acetate and benzoate in the presence of the standard anions
Determination of acetate, chloride, nitrite, nitrate, benzoate, phosphate, and sulfate using anion chromatography with conductivity detection after chemical suppression.
- AN-S-091Gluconate, fluoride, chloride, nitrate, and salicylate in a standard solution
Determination of gluconate, fluoride, formate, chloride, nitrate, and salicylate using anion chromatography with conductivity detection after chemical suppression.
- AN-S-118Formate, acetate, chloride, benzoate, and oxalate in phenolic extracts
Determination of formate, acetate, chloride, benzoate, and oxalate in phenolic extracts using anion chromatography with conductivity detection after chemical suppression.
- AN-S-130Six anions in PVC
Determination of fluoride, chloride, nitrite, nitrate, benzoate, and sulfate in PVC film using anion chromatography with conductivity detection after chemical suppression.
- AN-S-136Adipic and phthalic acid in a digestion solution
Determination of adipic acid and phthalic acid in an alkaline ester digestion solution using anion chromatography with conductivity detection after chemical suppression.
- AN-S-1522-Fluorobenzoate in water deposits
Determination of 2-fluorobenzoate in a water deposit from the oil production industry using anion chromatography with conductivity detection and chemical suppression.
- AN-S-24914 anions in an industrial process water
Determination of fluoride, acetate, propionate, formate, butyrate, chloride, nitrite, bromide, nitrate, benzoate, phosphate, sulfate, malonate, and oxalate in an industrial process water using anion chromatography with conductivity detection after sequential suppression.
- AN-S-337インライン・パーシャル・ループ技術を用いた Metrosep A Supp 15 - 50/4.0 におけるテレフタル酸、イソフタル酸、5-スルホイソフタル酸
テレフタル酸、イソフタル酸、5-スルホイソフタル酸などといった芳香族ジカルボン酸は、ポリエステルやアルキド樹脂の製造において重要なモノマーです。ジカルボン酸のモノマーの比率は、重合に多大な影響を及ぼします。Metrosep A Supp 15 - 50/4.0 の短いタイプのカラムを高い溶離剤濃度および高い流量で使用すれば、後から溶出される成分の分離は15分で完了します。
- AN-T-040Determination of phenylglycine content
Determination of phenylglycine through nonaqueous potentiometric titration with sodium methylate using a special combined glass electrode. Keyword: Antibiotics
- AN-T-151Titration of ketoconazole in accordance with Ph. Eur.
This Application Note describes the nonaqueous acid-base titration of ketoconazole in accordance with the European Pharmacopoeia. The Solvotrode easyClean was used as the electrode.
- AN-T-157スルファニルアミドの自動電位差滴定
スルファニルアミドの純度は、滴定試薬に亜硝酸ナトリウム溶液を使用して電位差自動滴定装置により測定できます。臭化物イオンはジアゾ化滴定を触媒するため、溶液には臭化カリウムを添加しました。
- AN-T-226Determination of functional groups in graphite and graphene oxide
Boehm titration is a quantitative analysis of functional groups on the surface of carbon materials based on their reactions with basic solutions of NaHCO3 (pKa = 6.4), Na2CO3 (pKa = 10.3), and NaOH (pKa = 15.7). This is a cost-efficient method that gives absolute values with high precision of the accessible, mainly oxygen-containing functional groups on the surface. Originally, Boehm titration was developed for carbon materials like conductive carbon black (CCB), activated carbon, porous carbon, and graphite. Modern carbon-based materials like graphene, graphene oxide (GO), or carbon nanotubes can also be analyzed this way.
- AN-U-011N-acetylcysteine in a medication against sinusitis according to USP
Determination of N-acetylcysteine and phenylalanine in tablets against sinusitis by anion chromatography with UV/VIS detection according to USP.
- AN-U-025Saccharin and its degradation products (benzamide, o-toluenesulfonamide) in a nickel electroplating bath
Determination of saccharin, benzamide, and o-toluenesulfonamide in a nickel electroplating bath using RP chromatography with UV detection.
- AN-U-026Phenylalanine, aspartame, caffeine, and benzoate in soft drinks
Determination of phenylalanine, aspartame, caffeine, and benzoate in a soft drink using RP chromatography with UV detection.
- AN-U-027System suitability test for cefazolin in accordance with USP
Determination of cefazolin in accordance with USP 28-NF 23 (Appendix 2) using RP chromatography and subsequent UV detection. Keyword: Antibiotics
- AN-U-028Salicylic acid impurity in aspirin tablets according to the USP method
Determination of salicylic acid and acetylsalicylic acid according to USP 28-NF 23 (second supplement) using RP chromatography with UV detection.
- AN-U-029Analysis of cloxacillin sodium in accordance with USP
Determination of cloxacillin sodium in accordance with USP 28-NF 23 (Appendix 2) using RP chromatography and subsequent UV detection. Keyword: Antibiotics