ProTrode sensors

ProTrode pH sensors

The ProTrode pH portfolio includes five sensor models (200, 250, 300, 350, and 400 ), each tailored for specific process needs. Each sensor combines specific glass types, diaphragm designs, and reference systems to match different process conditions. Options include H or HT glass, glass sleeve or ceramic pin diaphragms, and open junction designs.

ProTrode DO sensor

The ProTrode DO sensor uses optical technology to measure dissolved oxygen directly in the process stream. Real-time data improves batch consistency and reduces variability in bioprocesses.

ProTrode pCO₂ sensor

The ProTrode pCO₂ sensor provides accurate inline CO₂ monitoring by using the Severinghaus principle. Its titanium membrane cap resists corrosion and is easily replaceable. Designed for hygienic environments, it performs reliably under CIP, SIP, and autoclaving conditions.

Safety is a top priority for all industrial plants. This makes easy and convenient maintenance essential. The ProTrode sensors from Metrohm Process Analytics meet this need with SmartConnectors. These allow the sensors to be pre-calibrated in a safe, controlled laboratory setting. The calibration data is then stored, which eliminates the need for complex calibration work in challenging outdoor conditions.

Additionally, the ProTrode sensors allow for inline monitoring of pH, oxygen, and carbon dioxide 24 hours a day, 7 days a week. The inline sensors are used at the exact point-of-use (POU), directly in the process (inline), and completely independently with minimal operator intervention.

Real-time results from inline sensors can reduce start-up waste in lean manufacturing by highlighting true process variation as part of continuous process control. If process control is dependent upon laboratory analysis, necessary process adjustments would take place hours or even days after a detected out-of-spec measurement. This would cause loss of raw materials, final products, and even company assets (e.g., corrosion due to ion exchanger breakthrough).

The ProTrode inline sensors from Metrohm Process Analytics can be used in tandem with any Metrohm Process Analyzer (e.g., 2060 Process Analyzer) to monitor pH, oxygen, or carbon dioxide as part of a multi-component system (e.g., pH, alkalinity, or hardness in power plants to prevent corrosion events).

The ProTrode sensors are designed and produced in Switzerland, by Metrohm. With decades of experience in laboratory electrodes, Metrohm has developed high-quality inline sensors that deliver accurate and reliable results. The ProTrode pH probes use glass type HT or H to support a wide range of industrial applications.

The same focus on precision and durability applies to Metrohm’s inline DO and pCO₂ sensors. These bioreactor sensors are built for fermentation and cell culture processes, where continuous monitoring of oxygen and carbon dioxide is essential. They operate directly in the process, which eliminates the need for manual sampling.

Designed to withstand cleaning and sterilization, the sensors provide stable measurements with minimal calibration. As part of Metrohm’s bioprocessing sensor portfolio, they are easy to install, low-maintenance, and equipped with smart diagnostics. They guarantee hassle-free operation in any bioprocess.

Traditional analysis setups often require multiple transmitters to send data to process control systems (PLC or DCS). This can lead to high costs and frequent maintenance. Metrohm Process Analytics’ ProTrode sensors provide a solution for this problem. The 2060 Process Analyzer platform can be combined with multiple ProTrode sensors to create a multi-component analysis system.

With the process analyzer’s control software, you can monitor pH, DO, and pCO₂ in real-time and take corrective actions when needed. Additionally, the versatile 2060 Process Analyzer can measure other parameters, helping you improve efficiency, reduce raw material costs, and produce higher-quality products.