Byli jste přesměrováni na vaši místní verzi požadované stránky
Vyžádat nabídku
OMNIS Sample Robot M Pick&Place

OMNIS Sample Robot M Pick&Place

2.1011.1010

OMNIS Sample Robot M Pick&Place

en

2.1011.1010
Tento produkt se už nevyrábí, ale je stále podporován.
Přejít na náhradní produkt
    • Sample beakers, plastic (PP), 120 mL, 20 pieces 
    • 6.01400.200
    • Sample beakers, plastic (polypropylene, PP), 120 mL, suitable for 602041030 OMNIS sample rack, 20 pieces. 
    • <p>Sample beakers, plastic (polypropylene, PP), 120 mL, suitable for 602041030 OMNIS sample rack, 20 pieces.<br/> </p>
    • PCS
    • 5
    • Titration head 3xNS14 / 4x6.4 mm (P&P)
    • 6.01403.030
    • Titration head with 3 NS14 and 4x 6.4 mm openings for using 120 mL beakers in Pick&Place modules of the OMNIS Sample Robot Pick&Place with two retracted dosing tips. Prepared for being equipped with rinsing and aspiration tubing. 
    • <p>Titration head with 3 NS14 and 4x 6.4 mm openings for using 120 mL beakers in Pick&amp;Place modules of the OMNIS Sample Robot Pick&amp;Place with two retracted dosing tips. Prepared for being equipped with rinsing and aspiration tubing.</p><p> </p>
    • PCS
    • 1
    • Beaker adapter for OMNIS 120 mL sample beaker
    • 6.01404.030
    • Beaker adapter for centering the 120 mL sample beaker in the slide of the Pick&Place modules
    • <p>Beaker adapter for centering the 120 mL sample beaker in the slide of the Pick&amp;Place modules</p>
    • PCS
    • 2
    • Aspiration tip automation
    • 6.01543.100
    • Aspiration tip for automated OMNIS titrations.
    • <p>Aspiration tip for automated OMNIS titrations.</p>
    • PCS
    • 2
    • Silicone tubing 8/12 2.5 m
    • 6.01803.000
    • Silicone tubing for connecting to the drainage of the Pick&Place module or pump module in order to channel any solution overflows that may occur safely into the waste canister.
    • <p>Silicone tubing for connecting to the drainage of the Pick&amp;Place module or pump module in order to channel any solution overflows that may occur safely into the waste canister.</p>
    • PCS
    • 2
    • Stirring propeller 20 mm ETFE
    • 6.01900.030
    • Stirring propeller, 20 mm, with adjustable height for use with Rod Stirrer "Titrator" or Rod Stirrer "Sample Robot"
    • <p>Stirring propeller, 20 mm, with adjustable height for use with Rod Stirrer "Titrator" or Rod Stirrer "Sample Robot"</p>
    • PCS
    • 1
    • Rack base
    • 6.02001.010
    • Rack base for extending the main modules to the OMNIS Sample Robot
    • <p>Rack base for extending the main modules to the OMNIS Sample Robot</p>
    • PCS
    • 1
    • Module base M/L
    • 6.02003.010
    • Module base for extending the main modules M and L to the OMNIS Sample Robot.
    • <p>Module base for extending the main modules M and L to the OMNIS Sample Robot.</p>
    • PCS
    • 1
    • OMNIS sample rack, 16 x 120 mL, (PP)
    • 6.02041.030
    • OMNIS sample rack for OMNIS Sample Robot Pick&Place, suitable for 16 sample beakers. The following sample beakers can be used: 6.01400.200, 6.01400.300, 6.01400.303.Plastic: Polypropylene (PP)
    • <p>OMNIS sample rack for OMNIS Sample Robot Pick&amp;Place, suitable for 16 sample beakers. The following sample beakers can be used: 6.01400.200, 6.01400.300, 6.01400.303.</p><p>Plastic: Polypropylene (PP)</p>
    • PCS
    • 5
    • Gripper fingers 43 - 65 mm
    • 6.02601.010
    • Gripper fingers for OMNIS Sample Robot Pick&Place for gripping sample beakers with an outer diameter of 43 to 65 mm.
    • <p>Gripper fingers for OMNIS Sample Robot Pick&amp;Place for gripping sample beakers with an outer diameter of 43 to 65 mm.</p>
    • PCS
    • 1
    • Cable cover for Sample Robot
    • 6.02706.000
    • The cable cover protects the MDL and Ethernet cables connectors on the OMNIS Sample Robot.
    • <p>The cable cover protects the MDL and Ethernet cables connectors on the OMNIS Sample Robot.</p>
    • PCS
    • 1
    • "Peristaltic" (2-channel) pump module accessory set
    • 6.05001.010
    • The accessory set contains all of the components required for the tube connections between a rinsing pump and an aspiration pump at the "Peristaltic" pump module. In addition to preassembled tubing with Luer connectors, each of these also includes two press clamps and pump tubing.
    • <p>The accessory set contains all of the components required for the tube connections between a rinsing pump and an aspiration pump at the "Peristaltic" pump module. In addition to preassembled tubing with Luer connectors, each of these also includes two press clamps and pump tubing.</p>
    • PCS
    • 2
    • Container 10 L
    • 6.1621.000
    • As rinsing or waste container in automated systems.
    • As rinsing or waste container in automated systems.
    • PCS
    • 4
    • Cap for 10-L container
    • 6.1621.100
    • Cap for 10-L container. For easy and safe transportation of filled containers.
    • Cap for 10-L container. For easy and safe transportation of filled containers.
    • PCS
    • 4
    • Guiding sleeve
    • 6.2709.070
    • For fixation of buret and dosing tips in titration heads and electrode holders
    • For fixation of buret and dosing tips in titration heads and electrode holders
    • PCS
    • 2
    • Spray nozzle
    • 6.2740.020
    • For the fine-spraying of the rinsing solution.
    • <p>For the fine-spraying of the rinsing solution.</p>
    • PCS
    • 6
    • Rod Stirrer "Sample Robot"
    • 1.1006.0010
    • Rod stirrer with permanently mounted cable (2.5 m) for direct connection to the OMNIS Sample Robot.
    • <p>Rod stirrer with permanently mounted cable (2.5 m) for direct connection to the OMNIS Sample Robot.</p>
    • PCS
    • 1
    • Main module Pick&Place M
    • 1.1011.0020
    • Main module for setting up an OMNIS Sample Robot Pick&Place in size M. This module is equipped with the main lift and one gripper. One M/L module base and one rack base are each required to complete the setup. It must be equipped with sample racks, gripper fingers and workstations, e.g., Pick&Place module or a pump module in order to use it to set up a functioning Sample Robot. The selection of these components proceeds in accordance with the application.
    • <p>Main module for setting up an OMNIS Sample Robot Pick&amp;Place in size M. This module is equipped with the main lift and one gripper. One M/L module base and one rack base are each required to complete the setup. It must be equipped with sample racks, gripper fingers and workstations, e.g., Pick&amp;Place module or a pump module in order to use it to set up a functioning Sample Robot. The selection of these components proceeds in accordance with the application.</p>
    • PCS
    • 1
    • Pick&Place module
    • 1.1014.0010
    • Module for installation in the module plate of the Pick&amp;Place of the OMNIS Sample Robot. This workstation takes up the sample beaker for the analysis. Used sensors are cleaned or parked in the storage beaker of the Pick&amp;Place module between analyses. If stirring is required during the analysis, then a separate rod stirrer must be used for this workstation.
    • <p>Module for installation in the module plate of the Pick&amp;Place of the OMNIS Sample Robot. This workstation takes up the sample beaker for the analysis. Used sensors are cleaned or parked in the storage beaker of the Pick&amp;Place module between analyses. If stirring is required during the analysis, then a separate rod stirrer must be used for this workstation.</p>
    • PCS
    • 1
    • Sample beakers, plastic (PP), 120 mL, 20 pieces 
    • 6.01400.200
    • Sample beakers, plastic (polypropylene, PP), 120 mL, suitable for 602041030 OMNIS sample rack, 20 pieces. 
    • <p>Sample beakers, plastic (polypropylene, PP), 120 mL, suitable for 602041030 OMNIS sample rack, 20 pieces.<br/> </p>
    • PCS
    • 5
    • Titration head 3xNS14 / 4x6.4 mm (P&P)
    • 6.01403.030
    • Titration head with 3 NS14 and 4x 6.4 mm openings for using 120 mL beakers in Pick&Place modules of the OMNIS Sample Robot Pick&Place with two retracted dosing tips. Prepared for being equipped with rinsing and aspiration tubing. 
    • <p>Titration head with 3 NS14 and 4x 6.4 mm openings for using 120 mL beakers in Pick&amp;Place modules of the OMNIS Sample Robot Pick&amp;Place with two retracted dosing tips. Prepared for being equipped with rinsing and aspiration tubing.</p><p> </p>
    • PCS
    • 1
    • Beaker adapter for OMNIS 120 mL sample beaker
    • 6.01404.030
    • Beaker adapter for centering the 120 mL sample beaker in the slide of the Pick&Place modules
    • <p>Beaker adapter for centering the 120 mL sample beaker in the slide of the Pick&amp;Place modules</p>
    • PCS
    • 2
    • Aspiration tip automation
    • 6.01543.100
    • Aspiration tip for automated OMNIS titrations.
    • <p>Aspiration tip for automated OMNIS titrations.</p>
    • PCS
    • 2
    • Silicone tubing 8/12 2.5 m
    • 6.01803.000
    • Silicone tubing for connecting to the drainage of the Pick&Place module or pump module in order to channel any solution overflows that may occur safely into the waste canister.
    • <p>Silicone tubing for connecting to the drainage of the Pick&amp;Place module or pump module in order to channel any solution overflows that may occur safely into the waste canister.</p>
    • PCS
    • 2
    • Stirring propeller 20 mm ETFE
    • 6.01900.030
    • Stirring propeller, 20 mm, with adjustable height for use with Rod Stirrer "Titrator" or Rod Stirrer "Sample Robot"
    • <p>Stirring propeller, 20 mm, with adjustable height for use with Rod Stirrer "Titrator" or Rod Stirrer "Sample Robot"</p>
    • PCS
    • 1
    • Rack base
    • 6.02001.010
    • Rack base for extending the main modules to the OMNIS Sample Robot
    • <p>Rack base for extending the main modules to the OMNIS Sample Robot</p>
    • PCS
    • 1
    • Module base M/L
    • 6.02003.010
    • Module base for extending the main modules M and L to the OMNIS Sample Robot.
    • <p>Module base for extending the main modules M and L to the OMNIS Sample Robot.</p>
    • PCS
    • 1
    • OMNIS sample rack, 16 x 120 mL, (PP)
    • 6.02041.030
    • OMNIS sample rack for OMNIS Sample Robot Pick&Place, suitable for 16 sample beakers. The following sample beakers can be used: 6.01400.200, 6.01400.300, 6.01400.303.Plastic: Polypropylene (PP)
    • <p>OMNIS sample rack for OMNIS Sample Robot Pick&amp;Place, suitable for 16 sample beakers. The following sample beakers can be used: 6.01400.200, 6.01400.300, 6.01400.303.</p><p>Plastic: Polypropylene (PP)</p>
    • PCS
    • 5
    • Gripper fingers 43 - 65 mm
    • 6.02601.010
    • Gripper fingers for OMNIS Sample Robot Pick&Place for gripping sample beakers with an outer diameter of 43 to 65 mm.
    • <p>Gripper fingers for OMNIS Sample Robot Pick&amp;Place for gripping sample beakers with an outer diameter of 43 to 65 mm.</p>
    • PCS
    • 1
    • Cable cover for Sample Robot
    • 6.02706.000
    • The cable cover protects the MDL and Ethernet cables connectors on the OMNIS Sample Robot.
    • <p>The cable cover protects the MDL and Ethernet cables connectors on the OMNIS Sample Robot.</p>
    • PCS
    • 1
    • "Peristaltic" (2-channel) pump module accessory set
    • 6.05001.010
    • The accessory set contains all of the components required for the tube connections between a rinsing pump and an aspiration pump at the "Peristaltic" pump module. In addition to preassembled tubing with Luer connectors, each of these also includes two press clamps and pump tubing.
    • <p>The accessory set contains all of the components required for the tube connections between a rinsing pump and an aspiration pump at the "Peristaltic" pump module. In addition to preassembled tubing with Luer connectors, each of these also includes two press clamps and pump tubing.</p>
    • PCS
    • 2
    • Container 10 L
    • 6.1621.000
    • As rinsing or waste container in automated systems.
    • As rinsing or waste container in automated systems.
    • PCS
    • 4
    • Cap for 10-L container
    • 6.1621.100
    • Cap for 10-L container. For easy and safe transportation of filled containers.
    • Cap for 10-L container. For easy and safe transportation of filled containers.
    • PCS
    • 4
    • Guiding sleeve
    • 6.2709.070
    • For fixation of buret and dosing tips in titration heads and electrode holders
    • For fixation of buret and dosing tips in titration heads and electrode holders
    • PCS
    • 2
    • Spray nozzle
    • 6.2740.020
    • For the fine-spraying of the rinsing solution.
    • <p>For the fine-spraying of the rinsing solution.</p>
    • PCS
    • 6
    • Sample beakers, clear glass, 120 mL, 20 pieces 
    • 6.01400.300
    • Sample beakers, clear glass, 120 mL, suitable for 602041030 OMNIS sample rack, 20 pieces.
    • <p>Sample beakers, clear glass, 120 mL, suitable for 602041030 OMNIS sample rack, 20 pieces.</p>
    • PCS
    • 1
    • Sample beakers, amber glass, 120 mL, 20 pieces
    • 6.01400.303
    • Sample beakers, amber glass, 120 mL, suitable for 602041030 OMNIS sample rack, 20 pieces
    • <p>Sample beakers, amber glass, 120 mL, suitable for 602041030 OMNIS sample rack, 20 pieces</p>
    • PCS
    • 1
    • Consumable Kit OMNIS Gripper
    • 6.05700.000
    • Four slide sleeves and rubber gripper fingers each for replacement on the gripper finger of the OMNIS Sample Robot.
    • <p>Four slide sleeves and rubber gripper fingers each for replacement on the gripper finger of the OMNIS Sample Robot.</p>
    • PCS
    • 1
    • Consumable Kit OMNIS Pump Module (2-channel)
    • 6.05700.010
    • Two pump tubings each and associated press clamps for replacement in the OMNIS pump module. One Consumable Kit can be used for re-equipping two peristaltic pumps of the pump module.
    • <p>Two pump tubings each and associated press clamps for replacement in the OMNIS pump module. One Consumable Kit can be used for re-equipping two peristaltic pumps of the pump module.</p>
    • PCS
    • 1
    • Upgrade Sample Robot M to L
    • 6.05800.020
    • The set contains all of the components required for the upgrade of an already existing OMNIS Sample Robot from size M to size L. Apart from the required rack and module bases, all the required cables, screws, arm extensions as well as the function license are included.
    • <p>The set contains all of the components required for the upgrade of an already existing OMNIS Sample Robot from size M to size L. Apart from the required rack and module bases, all the required cables, screws, arm extensions as well as the function license are included.</p>
    • PCS
    • 1