Byli jste přesměrováni na vaši místní verzi požadované stránky
Vyžádat nabídku
Module base M/L

Module base M/L

6.02003.010

    • /shared/en/products/2/1014/210140010
    • Pick&Place module
    • https://s7e5a.scene7.com/is/image/metrohm/4290?$sq-500$&bfc=on
    • 2.1014.0010
    • Module for installation in the module plate of the Pick&Place of the OMNIS Sample Robot. This workstation takes up the sample beaker for the analysis. Used sensors are cleaned or parked in the storage beaker of the Pick&Place module between analyses. If stirring is required during the analysis, then a separate rod stirrer must be used for this workstation.
    • <p>Module for installation in the module plate of the Pick&amp;Place of the OMNIS Sample Robot. This workstation takes up the sample beaker for the analysis. Used sensors are cleaned or parked in the storage beaker of the Pick&amp;Place module between analyses. If stirring is required during the analysis, then a separate rod stirrer must be used for this workstation.</p>
    • PCS
    • 1
    • /shared/en/products/2/1014/210140110
    • Pick&Place module with stirrer
    • https://s7e5a.scene7.com/is/image/metrohm/4290?$sq-500$&bfc=on
    • 2.1014.0110
    • Module for installation in the module plate of the Pick&Place of the OMNIS Sample Robot. This workstation takes up the sample beaker for the analysis. The built-in magnetic stirrer makes it possible to analyze samples that were prepared externally on a magnetic agitator directly in the Sample Robot without having to remove the magnetic stirring bar beforehand. Used sensors are cleaned or parked in the storage beaker of the Pick&Place module between analyses.
    • <p>Module for installation in the module plate of the Pick&amp;Place of the OMNIS Sample Robot. This workstation takes up the sample beaker for the analysis. The built-in magnetic stirrer makes it possible to analyze samples that were prepared externally on a magnetic agitator directly in the Sample Robot without having to remove the magnetic stirring bar beforehand. Used sensors are cleaned or parked in the storage beaker of the Pick&amp;Place module between analyses.</p>
    • PCS
    • 1
    • /shared/en/products/2/1016/210160010
    • Peristaltic (2-channel) pump module
    • https://s7e5a.scene7.com/is/image/metrohm/4288?$sq-500$&bfc=on
    • 2.1016.0010
    • Module for installation in the module plate of the Pick&Place of the OMNIS Sample Robot. This workstation is equipped with both a rinsing pump and an aspiration pump. They are used to clean the sensors in a Pick&Place module and to empty the sample beaker after the analysis before it is returned to the rack once again. 
    • <p>Module for installation in the module plate of the Pick&amp;Place of the OMNIS Sample Robot. This workstation is equipped with both a rinsing pump and an aspiration pump. They are used to clean the sensors in a Pick&amp;Place module and to empty the sample beaker after the analysis before it is returned to the rack once again.</p><p> </p>
    • PCS
    • 1
    • /shared/en/products/2/1016/210160110
    • Peristaltic (4-channel) pump module
    • https://s7e5a.scene7.com/is/image/metrohm/4289?$sq-500$&bfc=on
    • 2.1016.0110
    • Module for installation in the module plate of the Pick&Place of the OMNIS Sample Robot. This workstation is equipped with two rinsing pumps and two aspiration pumps each. They are used to clean the sensors in two Pick&Place modules and to empty the sample beaker after the analysis before it is placed back in the rack once again.
    • <p>Module for installation in the module plate of the Pick&amp;Place of the OMNIS Sample Robot. This workstation is equipped with two rinsing pumps and two aspiration pumps each. They are used to clean the sensors in two Pick&amp;Place modules and to empty the sample beaker after the analysis before it is placed back in the rack once again.</p>
    • PCS
    • 1