Chuyển hướng tin nhắn
Nhận báo giá

Tìm kiếm những Câu Hỏi Thường Gặp

Lọc theo
261 FAQS
  • FAQ
    A standard for the calibration was recorded with the wrong sample type. What should I do?
    // Database
  • FAQ
    Is the color indicator of the adsorption material harmful?
    // Suppression
  • FAQ
    The background conductivity is too high.
    // Maintenance Troubleshooting
  • FAQ
    Ever since updating from tiamo 1.X to tiamo 2.X other Metrohm programs no longer work properly, and devices are no longer recognized.
    // General (tiamo)
  • FAQ
    Is it possible to repair a defective driving axle (6.1204.x010 or 6.1204.x20)?
    // Problems with the measurement
  • FAQ
    Metrohm Inline Dialysis
    // MISP techniques (Metrohm Inline Sample Preparation)
  • FAQ
    Which precautions should I take when using peristaltic pumps?
    // Peristaltic pumps
  • FAQ
    Do norms/standards exist for biodiesel and biodiesel blends?
    // Method setup-related
  • FAQ
    The peristaltic pump on the sample changer is not transferring the entire sample to the measuring vessel.
    // Problems with the hardware
  • FAQ
    The baseline is noisy.
    // Maintenance Troubleshooting
  • FAQ
    How can I check that my "Sample data" in a "Sample table" are complete?
    // Chromatography
  • FAQ
    When are the septum and the O-rings/PTFE sleeves to be changed?
    // Installation
  • FAQ
    What is the optimal substance weight for titer determination?
    // Titer determination
  • FAQ
    Metrohm intelligent Partial Loop Injection Technique (MiPT)
    // MISP techniques (Metrohm Inline Sample Preparation)
  • FAQ
    Metrohm intelligent Preconcentration Technique with Matrix Elimination (MiPCT-ME)
    // MISP techniques (Metrohm Inline Sample Preparation)
  • FAQ
    Can platinum electrode tips be polished
    // Maintenance of Rotating Disk Electrodes// Rotating disk electrode
  • FAQ
    Printing does not work
    // General (tiamo)
  • FAQ
    Where to buy KF reagents?
    // Reagents
  • FAQ
    Does the position of the PTFE tubing in the measuring vessel play a role?
    // Hardware-related// Preparing the measuring vessel
  • FAQ
    How can I polish my gold RDE?
    // RDE (Rotating Disk Electrodes)// Maintenance of Rotating Disk Electrodes
  • FAQ
    Where can I find information on spare parts for the Multi-Mode Electrode and the Multi-Mode Electrode pro?
    // Installation of Multi-Mode Electrode pro// Multi-Mode Electrode, Multi-Mode Electrode pro// Installation of Multi-Mode Electrode pro// Maintenance of the Multi-Mode Electrode pro// Maintenance of the Multi-Mode Electrode
  • FAQ
    How often is the molecular sieve to be changed?
    // Installation// Installation of coulometric cell
  • FAQ
    How much sample to weigh in?
    // Sample handling, Sample processing
  • FAQ
    How often does the bridge electrolyte need changing?
    // Maintenance of reference electrodes// Reference electrode
  • FAQ
    The electrode test is failing.
    // Problems with the measurement
  • FAQ
    How often should my KF titrator be validated?
    // Validation
  • FAQ
    How is the database structured?
    // Database
  • FAQ
    The peaks exhibit extreme broadening.
    // Maintenance Troubleshooting
  • FAQ
    My reference electrode has dried out. Can I regenerate it again?
    // Maintenance of reference electrodes// Reference electrode// Reference electrode// Maintenance of the reference electrode
  • FAQ
    Overtitration took place, i.e., the titrated solution is dark yellow to brown instead of light yellow. How to prevent this?
    // Sample handling, Sample processing
  • FAQ
    Why are the values found too high?
    // Sample handling, Sample processing
  • FAQ
    When installing clients in client/server systems (tiamo multi) you must always be logged onto the server in Windows.
    // Client server
  • FAQ
    How often is the Dosing/Exchange Unit to be prepared (Preparing/«Prep» function)? (for volumetric KF titration)
    // Installation
  • FAQ
    Metrohm Inline Cation Removal
    // MISP techniques (Metrohm Inline Sample Preparation)
  • FAQ
    The evaluation criterion has been reached. However, no results are being displayed.
    // Problems with Dilution Titration (suppressor determination)
  • FAQ
    Which types of subprograms are there?
    // Method
  • FAQ
    How dangerous is handling mercury?
    // Installation of Multi-Mode Electrode pro// Multi-Mode Electrode, Multi-Mode Electrode pro// Installation of Multi-Mode Electrode pro// Mercury handling// Maintenance of the Multi-Mode Electrode pro// Maintenance of the Multi-Mode Electrode
  • FAQ
    What to do to improve the release of water?
    // Sample handling, Sample processing
  • FAQ
    The peak areas are smaller than expected.
    // Maintenance Troubleshooting
  • FAQ
    How can I create a new calibration from already recorded standards in which the component assignment was not correct?
    // Database
  • FAQ
    How can the entire calibration be transferred to all standards?
    // Database
  • FAQ
    If I view a determination on two different PCs, different times (determination start, etc.) are displayed.
    // Determinations
  • FAQ
    The measured values exhibit excessive scattering.
    // Maintenance Troubleshooting
  • FAQ
    What is the smallest and what is the largest sample amount that I can use for the determination?
    // Application-related// Preparing the reaction vessel
  • FAQ
    Can I determine the shelf life of my sample using the Rancimat?
    // General
  • FAQ
    The result is lower than expected.
    // General
  • FAQ
    The signal is not decreasing despite suppressor addition.
    // Problems with the measurement
  • FAQ
    Do norms/standards exist for oil and fat samples?
    // Method setup-related
  • FAQ
    Metrohm Inline Dilution Technique (MIDT)
    // MISP techniques (Metrohm Inline Sample Preparation)
  • FAQ
    Can Metrohm polish platinum electrode tips?
    // Maintenance of Rotating Disk Electrodes// Rotating disk electrode