Chuyển hướng tin nhắn
Nhận báo giá
"ProfIC 5 – Cation" – Professional IC System with variable sample preconcentration

"ProfIC 5 – Cation" – Professional IC System with variable sample preconcentration

ProfIC 5 - Cation

  • Tổng quan
  • Thông số kỹ thuật

The Professional IC system with conductivity detection enables trace analysis of cations or anions (non-suppressed). With the "ProfIC 5", concentrations down to the lowest ppb range (µg/L) can be safely and accurately determined. The intelligent 800 Dosino takes over the high-precision preconcentration of the sample on the preconcentration column. This replaces the sample loop.
 

Schematic diagram
 

Sản phẩm này đã ngừng sản xuất, nhưng vẫn được hỗ trợ.
Chuyển đến sản phẩm thay thế
Thiết bị Của bạn "ProfIC 5 – Cation" – Professional IC System with variable sample preconcentrationdownload Tải về bản PDF
  • Phụ kiện tiêu chuẩn
  • Phụ kiện tùy chọn
800 Dosino
800 Dosino
2.800.0010
Drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).
IC Conductivity Detector
IC Conductivity Detector
2.850.9010
Compact and intelligent high performance conductivity detector for intelligent IC instruments. Outstanding temperature stability, the complete signal processing within the protected detector block and the latest generation of DSP – Digital Signal Processing – guarantee the highest precision of the measurement. No change of measuring ranges (not even automatic ones) is required, due to the dynamic working range.
858 Professional Sample Processor
858 Professional Sample Processor
2.858.0010
The 858 Professional Sample Processor processes samples from 500 µL to 500 mL. The sample transfer takes place either by means of a peristaltic pump on the 850 Professional IC system or with an 800 Dosino.
Metrosep I Trap 1 - 100/4.0
Metrosep I Trap 1 - 100/4.0
6.1014.200
The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic, i.e. cationic and anionic, contaminants from aqueous solutions. Its use is especially recommended for the purification of the transfer water in combination with "MISP" or "Metrohm Inline Sample Preparation". Using the Metrosep I Trap 1 - 100/4.0 column can significantly reduce the influence of the transfer water on the system blank.
Hiển thị thêm