OMNIS Workstation Module (1T/2P)

2.1024.0020

OMNIS Workstation Module (1T/2P)

2.1024.0020

- Aspiration tip automation
- 6.01543.100
- Aspiration tip for automated OMNIS titrations.
- Aspiration tip for automated OMNIS titrations.
- PCS
- 1
- Tubing adapter for drainage tubing
- 6.01804.500
- Tubing adapter for drainage tubing on Pick&Place modules and pump modules in the OMNIS Sample Robot Pick&Place.
- Tubing adapter for drainage tubing on Pick&Place modules and pump modules in the OMNIS Sample Robot Pick&Place.
- PCS
- 1
- FEP tubing connection / M6 / 66.5 cm
- 6.01805.000
- With light protection and protection against kinks.
- With light protection and protection against kinks.
- PCS
- 3
- PTFE tubing connection / M8 / 66.5 cm
- 6.01805.010
- With light protection and protection against kinks.
- With light protection and protection against kinks.
- PCS
- 1
- Tubing and cable guide
- 6.02705.000
- For organizing tubing and cables between Pick&Place module and titrator
- For organizing tubing and cables between Pick&Place module and titrator
- PCS
- 1
- WSM accessory kit (1T/2P)
- 6.05001.110
- This accessory kit contains all of the components required for the tubing setup for 1 rinsing pump and 1 aspiration pump on the pump module of the OMNIS Workstation Module (1T/2P). In addition to preassembled tubing with Luer connectors, each of these also includes 2 press clamps and pump tubing. A tool for simplifying attachment of the Luer connectors is also included in the set.
- This accessory kit contains all of the components required for the tubing setup for 1 rinsing pump and 1 aspiration pump on the pump module of the OMNIS Workstation Module (1T/2P). In addition to preassembled tubing with Luer connectors, each of these also includes 2 press clamps and pump tubing. A tool for simplifying attachment of the Luer connectors is also included in the set.
- PCS
- 1
- Container 10 L
- 6.1621.000
- As rinsing or waste container in automated systems.
- As rinsing or waste container in automated systems.
- PCS
- 2
- Cap for 10-L container
- 6.1621.100
- Cap for 10-L container. For easy and safe transportation of filled containers.
- Cap for 10-L container. For easy and safe transportation of filled containers.
- PCS
- 2
- Guiding sleeve
- 6.2709.070
- For fixation of buret and dosing tips in titration heads and electrode holders
- For fixation of buret and dosing tips in titration heads and electrode holders
- PCS
- 1
- Spray nozzle
- 6.2740.020
- For the fine-spraying of the rinsing solution.
- For the fine-spraying of the rinsing solution.
- PCS
- 3
- OMNIS Workstation Module (1T/2P)
- 1.1024.0020
- Module for installation in the OMNIS Sample Robot WSM. This module contains a workstation for the automatic processing of sample vessels and 2 pumps for the automatic cleaning (rinsing and extraction) of sample vessels and sensors. The workstation takes up the sample beaker for the analysis. Used sensors can be cleaned or parked in the storage beaker of the workstation between analyses. If stirring is required during the analysis, then a separate rod stirrer or a magnetic stirrer can be installed for this workstation.
- Module for installation in the OMNIS Sample Robot WSM. This module contains a workstation for the automatic processing of sample vessels and 2 pumps for the automatic cleaning (rinsing and extraction) of sample vessels and sensors. The workstation takes up the sample beaker for the analysis. Used sensors can be cleaned or parked in the storage beaker of the workstation between analyses. If stirring is required during the analysis, then a separate rod stirrer or a magnetic stirrer can be installed for this workstation.
- PCS
- 1
- Aspiration tip automation
- 6.01543.100
- Aspiration tip for automated OMNIS titrations.
- Aspiration tip for automated OMNIS titrations.
- PCS
- 1
- Tubing adapter for drainage tubing
- 6.01804.500
- Tubing adapter for drainage tubing on Pick&Place modules and pump modules in the OMNIS Sample Robot Pick&Place.
- Tubing adapter for drainage tubing on Pick&Place modules and pump modules in the OMNIS Sample Robot Pick&Place.
- PCS
- 1
- FEP tubing connection / M6 / 66.5 cm
- 6.01805.000
- With light protection and protection against kinks.
- With light protection and protection against kinks.
- PCS
- 3
- PTFE tubing connection / M8 / 66.5 cm
- 6.01805.010
- With light protection and protection against kinks.
- With light protection and protection against kinks.
- PCS
- 1
- Tubing and cable guide
- 6.02705.000
- For organizing tubing and cables between Pick&Place module and titrator
- For organizing tubing and cables between Pick&Place module and titrator
- PCS
- 1
- WSM accessory kit (1T/2P)
- 6.05001.110
- This accessory kit contains all of the components required for the tubing setup for 1 rinsing pump and 1 aspiration pump on the pump module of the OMNIS Workstation Module (1T/2P). In addition to preassembled tubing with Luer connectors, each of these also includes 2 press clamps and pump tubing. A tool for simplifying attachment of the Luer connectors is also included in the set.
- This accessory kit contains all of the components required for the tubing setup for 1 rinsing pump and 1 aspiration pump on the pump module of the OMNIS Workstation Module (1T/2P). In addition to preassembled tubing with Luer connectors, each of these also includes 2 press clamps and pump tubing. A tool for simplifying attachment of the Luer connectors is also included in the set.
- PCS
- 1
- Container 10 L
- 6.1621.000
- As rinsing or waste container in automated systems.
- As rinsing or waste container in automated systems.
- PCS
- 2
- Cap for 10-L container
- 6.1621.100
- Cap for 10-L container. For easy and safe transportation of filled containers.
- Cap for 10-L container. For easy and safe transportation of filled containers.
- PCS
- 2
- Guiding sleeve
- 6.2709.070
- For fixation of buret and dosing tips in titration heads and electrode holders
- For fixation of buret and dosing tips in titration heads and electrode holders
- PCS
- 1
- Spray nozzle
- 6.2740.020
- For the fine-spraying of the rinsing solution.
- For the fine-spraying of the rinsing solution.
- PCS
- 3
- OMNIS Rod Stirrer Sample Robot
- 2.1006.0010
- Rod stirrer with permanently mounted cable (2.5 m) for direct connection to the OMNIS Sample Robot.
- Rod stirrer with permanently mounted cable (2.5 m) for direct connection to the OMNIS Sample Robot.
- PCS
- 1
- Titration head 6xNS14 / 3xNS9 (P&P)
- 6.01403.000
- Titration head with 6 NS14 and 3 NS 9 openings for use in Pick&Place modules of the OMNIS Sample Robot Pick&Place
- Titration head with 6 NS14 and 3 NS 9 openings for use in Pick&Place modules of the OMNIS Sample Robot Pick&Place
- PCS
- 1
- Titration head 4xM10 (P&P)
- 6.01403.010
- Titration head with 4 M10 openings for use in Pick&Place modules of the OMNIS Sample Robot Pick&Place
- Titration head with 4 M10 openings for use in Pick&Place modules of the OMNIS Sample Robot Pick&Place
- PCS
- 1
- Titration head 4xM10 for KFT (P&P)
- 6.01403.020
- Titration head with 4 M10 openings for Karl Fischer titration in Pick&Place modules of the OMNIS Sample Robot Pick&Place with 4 M10 screw nipples and stoppers.
- Titration head with 4 M10 openings for Karl Fischer titration in Pick&Place modules of the OMNIS Sample Robot Pick&Place with 4 M10 screw nipples and stoppers.
- PCS
- 1
- Titration head 3xNS14 / 4x6.4 mm (P&P)
- 6.01403.030
- Titration head with 3 NS14 and 4x 6.4 mm openings for using 120 mL beakers in Pick&Place modules of the OMNIS Sample Robot Pick&Place with two retracted dosing tips. Prepared for being equipped with rinsing and aspiration tubing.
- Titration head with 3 NS14 and 4x 6.4 mm openings for using 120 mL beakers in Pick&Place modules of the OMNIS Sample Robot Pick&Place with two retracted dosing tips. Prepared for being equipped with rinsing and aspiration tubing. 
- PCS
- 1
- Titration head 2xNS14 (P&P)
- 6.01403.040
- Titration head with 2 NS14 openings for use in Pick&Place modules of the OMNIS Sample Robot Pick&Place with 3 retracted dosing tips. Prepared for being equipped with rinsing nozzles. One aspiration tube is already retracted into the titration head.
- Titration head with 2 NS14 openings for use in Pick&Place modules of the OMNIS Sample Robot Pick&Place with 3 retracted dosing tips. Prepared for being equipped with rinsing nozzles. One aspiration tube is already retracted into the titration head.
- PCS
- 1
- Titration head for KFT with reinforced tips (P&P)
- 6.01403.050
- Titration head for Karl Fischer titration in Pick&Place modules of the OMNIS Sample Robot Pick&Place. In addition to 2 reinforced antidiffusion tips, the titration head offers an opening for using an homogenizer (Polytron 1300D) or rod stirrer.
- Titration head for Karl Fischer titration in Pick&Place modules of the OMNIS Sample Robot Pick&Place. In addition to 2 reinforced antidiffusion tips, the titration head offers an opening for using an homogenizer (Polytron 1300D) or rod stirrer.
- PCS
- 1
- Titration head 3xNS14 / 4x6.4 mm for 200 mL disposable beaker (P&P)
- 6.01403.060
- Titration head with 3 NS14 and 4x 6.4 mm openings for using 200 mL PP disposable beakers (6.1459.310) or 150 mL beaker glasses (high shape, without spout) in Pick&Place modules of the OMNIS Sample Robot Pick&Place with two retracted dosing tips. Prepared for being equipped with rinsing and aspiration tubing.
- Titration head with 3 NS14 and 4x 6.4 mm openings for using 200 mL PP disposable beakers (6.1459.310) or 150 mL beaker glasses (high shape, without spout) in Pick&Place modules of the OMNIS Sample Robot Pick&Place with two retracted dosing tips. Prepared for being equipped with rinsing and aspiration tubing.
- PCS
- 1
- Beaker adapter for 200 mL sample beaker
- 6.01404.020
- Beaker adapter for centering the 200 mL sample beaker in the slide of the Pick&Place modules.
- Beaker adapter for centering the 200 mL sample beaker in the slide of the Pick&Place modules.
- PCS
- 1
- Beaker adapter for OMNIS 120 mL sample beaker
- 6.01404.030
- Beaker adapter for centering the 120 mL sample beaker in the slide of the Pick&Place modules
- Beaker adapter for centering the 120 mL sample beaker in the slide of the Pick&Place modules
- PCS
- 1
- Beaker adapter for OMNIS 75 mL sample beaker
- 6.01404.040
- Beaker adapter for centering the 75 mL sample beaker in the slide of the Pick&Place modules
- Beaker adapter for centering the 75 mL sample beaker in the slide of the Pick&Place modules
- PCS
- 1
- Beaker adapter for 150 mL sample beaker
- 6.01404.050
- Beaker adapter for centering the 150 mL sample beaker in the slide of the Pick&Place modules.
- Beaker adapter for centering the 150 mL sample beaker in the slide of the Pick&Place modules.
- PCS
- 1
- Titration head adapter
- 6.01462.010
- This adapter enables the utilization of titration heads of the Sample Processor generation (814/815/855) on sample changers with screw-on titration heads.
- This adapter enables the utilization of titration heads of the Sample Processor generation (814/815/855) on sample changers with screw-on titration heads.
- PCS
- 1
- WSM connector plate
- 6.02700.020
- The connector plate connects 2 OMNIS Workstation Modules on a Sample Robot WSM M or L, thus lending it additional stability.
- The connector plate connects 2 OMNIS Workstation Modules on a Sample Robot WSM M or L, thus lending it additional stability.
- PCS
- 1
- Consumable Kit OMNIS Pump Module (2-channel)
- 6.05700.010
- Two pump tubings each and associated press clamps for replacement in the OMNIS pump module. One Consumable Kit can be used for re-equipping two peristaltic pumps of the pump module.
- Two pump tubings each and associated press clamps for replacement in the OMNIS pump module. One Consumable Kit can be used for re-equipping two peristaltic pumps of the pump module.
- PCS
- 1
- Upgrade Pick&Place module WSM
- 6.05800.540
- This set contains all of the components required to extend an OMNIS Workstation Module (1T/0P) or (1T/2P) to include a second workstation. Sample throughput can be doubled as a result of the extension.
- This set contains all of the components required to extend an OMNIS Workstation Module (1T/0P) or (1T/2P) to include a second workstation. Sample throughput can be doubled as a result of the extension.
- PCS
- 1
- Upgrade stirrer WSM
- 6.05800.560
- This set contains all of the components required to equip a workstation of an OMNIS Workstation Module with a magnetic stirrer.
- This set contains all of the components required to equip a workstation of an OMNIS Workstation Module with a magnetic stirrer.
- PCS
- 1
- Upgrade peristaltic pump module WSM
- 6.05800.570
- This set contains all of the components that are required for the upgrade of an OMNIS Workstation Module involving the addition of 2 pumps. This set can be used not only to extend the number of pumps from 0 to 2, but also from 2 to 4, and enables the effective cleaning of sensors and sample vessels. In addition to the pumps required, all of the necessary tubing and canisters are included for equipping 1 rinsing pump and 1 aspiration pump each.
- This set contains all of the components that are required for the upgrade of an OMNIS Workstation Module involving the addition of 2 pumps. This set can be used not only to extend the number of pumps from 0 to 2, but also from 2 to 4, and enables the effective cleaning of sensors and sample vessels. In addition to the pumps required, all of the necessary tubing and canisters are included for equipping 1 rinsing pump and 1 aspiration pump each.
- PCS
- 1