Pick&Place module with stirrer

2.1014.0110

Pick&Place module with stirrer

2.1014.0110

- Silicone tubing 8/12 2.5 m
- 6.01803.000
- Silicone tubing for connecting to the drainage of the Pick&Place module or pump module in order to channel any solution overflows that may occur safely into the waste canister.
- Silicone tubing for connecting to the drainage of the Pick&Place module or pump module in order to channel any solution overflows that may occur safely into the waste canister.
- PCS
- 1
- Tubing adapter for drainage tubing
- 6.01804.500
- Tubing adapter for drainage tubing on Pick&Place modules and pump modules in the OMNIS Sample Robot Pick&Place.
- Tubing adapter for drainage tubing on Pick&Place modules and pump modules in the OMNIS Sample Robot Pick&Place.
- PCS
- 1
- Safety shield for Pick&Place module
- 6.02700.000
- Safety shield for Pick&Place modules
- Safety shield for Pick&Place modules
- PCS
- 1
- Tubing clip to workstation (10 pcs)
- 6.02704.000
- For fixing in place the PVC or PTFE tubing that leads to the workstation.
- For fixing in place the PVC or PTFE tubing that leads to the workstation. 
- PCS
- 1
- Tubing and cable guide
- 6.02705.000
- For organizing tubing and cables between Pick&Place module and titrator
- For organizing tubing and cables between Pick&Place module and titrator
- PCS
- 1
- Pick&Place module with stirrer
- 1.1014.0110
- Module for installation in the module plate of the Pick&Place of the OMNIS Sample Robot. This workstation takes up the sample beaker for the analysis. The built-in magnetic stirrer makes it possible to analyze samples that were prepared externally on a magnetic agitator directly in the Sample Robot without having to remove the magnetic stirring bar beforehand. Used sensors are cleaned or parked in the storage beaker of the Pick&Place module between analyses.
- Module for installation in the module plate of the Pick&Place of the OMNIS Sample Robot. This workstation takes up the sample beaker for the analysis. The built-in magnetic stirrer makes it possible to analyze samples that were prepared externally on a magnetic agitator directly in the Sample Robot without having to remove the magnetic stirring bar beforehand. Used sensors are cleaned or parked in the storage beaker of the Pick&Place module between analyses.
- PCS
- 1
- Silicone tubing 8/12 2.5 m
- 6.01803.000
- Silicone tubing for connecting to the drainage of the Pick&Place module or pump module in order to channel any solution overflows that may occur safely into the waste canister.
- Silicone tubing for connecting to the drainage of the Pick&Place module or pump module in order to channel any solution overflows that may occur safely into the waste canister.
- PCS
- 1
- Tubing adapter for drainage tubing
- 6.01804.500
- Tubing adapter for drainage tubing on Pick&Place modules and pump modules in the OMNIS Sample Robot Pick&Place.
- Tubing adapter for drainage tubing on Pick&Place modules and pump modules in the OMNIS Sample Robot Pick&Place.
- PCS
- 1
- Safety shield for Pick&Place module
- 6.02700.000
- Safety shield for Pick&Place modules
- Safety shield for Pick&Place modules
- PCS
- 1
- Tubing clip to workstation (10 pcs)
- 6.02704.000
- For fixing in place the PVC or PTFE tubing that leads to the workstation.
- For fixing in place the PVC or PTFE tubing that leads to the workstation. 
- PCS
- 1
- Tubing and cable guide
- 6.02705.000
- For organizing tubing and cables between Pick&Place module and titrator
- For organizing tubing and cables between Pick&Place module and titrator
- PCS
- 1
- Titration head 6xNS14 / 3xNS9 (P&P)
- 6.01403.000
- Titration head with 6 NS14 and 3 NS 9 openings for use in Pick&Place modules of the OMNIS Sample Robot Pick&Place
- Titration head with 6 NS14 and 3 NS 9 openings for use in Pick&Place modules of the OMNIS Sample Robot Pick&Place
- PCS
- 1
- Titration head 4xM10 (P&P)
- 6.01403.010
- Titration head with 4 M10 openings for use in Pick&Place modules of the OMNIS Sample Robot Pick&Place
- Titration head with 4 M10 openings for use in Pick&Place modules of the OMNIS Sample Robot Pick&Place
- PCS
- 1
- Titration head 4xM10 for KFT (P&P)
- 6.01403.020
- Titration head with 4 M10 openings for Karl Fischer titration in Pick&Place modules of the OMNIS Sample Robot Pick&Place with 4 M10 screw nipples and stoppers.
- Titration head with 4 M10 openings for Karl Fischer titration in Pick&Place modules of the OMNIS Sample Robot Pick&Place with 4 M10 screw nipples and stoppers.
- PCS
- 1
- Titration head 3xNS14 / 4x6.4 mm (P&P)
- 6.01403.030
- Titration head with 3 NS14 and 4x 6.4 mm openings for using 120 mL beakers in Pick&Place modules of the OMNIS Sample Robot Pick&Place with two retracted dosing tips. Prepared for being equipped with rinsing and aspiration tubing.
- Titration head with 3 NS14 and 4x 6.4 mm openings for using 120 mL beakers in Pick&Place modules of the OMNIS Sample Robot Pick&Place with two retracted dosing tips. Prepared for being equipped with rinsing and aspiration tubing. 
- PCS
- 1
- Titration head 2xNS14 (P&P)
- 6.01403.040
- Titration head with 2 NS14 openings for use in Pick&Place modules of the OMNIS Sample Robot Pick&Place with 3 retracted dosing tips. Prepared for being equipped with rinsing nozzles. One aspiration tube is already retracted into the titration head.
- Titration head with 2 NS14 openings for use in Pick&Place modules of the OMNIS Sample Robot Pick&Place with 3 retracted dosing tips. Prepared for being equipped with rinsing nozzles. One aspiration tube is already retracted into the titration head.
- PCS
- 1
- Titration head for KFT with reinforced tips (P&P)
- 6.01403.050
- Titration head for Karl Fischer titration in Pick&Place modules of the OMNIS Sample Robot Pick&Place. In addition to 2 reinforced antidiffusion tips, the titration head offers an opening for using an homogenizer (Polytron 1300D) or rod stirrer.
- Titration head for Karl Fischer titration in Pick&Place modules of the OMNIS Sample Robot Pick&Place. In addition to 2 reinforced antidiffusion tips, the titration head offers an opening for using an homogenizer (Polytron 1300D) or rod stirrer.
- PCS
- 1
- Titration head 3xNS14 / 4x6.4 mm for 200 mL disposable beaker (P&P)
- 6.01403.060
- Titration head with 3 NS14 and 4x 6.4 mm openings for using 200 mL PP disposable beakers (6.1459.310) or 150 mL beaker glasses (high shape, without spout) in Pick&Place modules of the OMNIS Sample Robot Pick&Place with two retracted dosing tips. Prepared for being equipped with rinsing and aspiration tubing.
- Titration head with 3 NS14 and 4x 6.4 mm openings for using 200 mL PP disposable beakers (6.1459.310) or 150 mL beaker glasses (high shape, without spout) in Pick&Place modules of the OMNIS Sample Robot Pick&Place with two retracted dosing tips. Prepared for being equipped with rinsing and aspiration tubing.
- PCS
- 1
- Beaker adapter for 200 mL sample beaker
- 6.01404.020
- Beaker adapter for centering the 200 mL sample beaker in the slide of the Pick&Place modules.
- Beaker adapter for centering the 200 mL sample beaker in the slide of the Pick&Place modules.
- PCS
- 1
- Beaker adapter for OMNIS 120 mL sample beaker
- 6.01404.030
- Beaker adapter for centering the 120 mL sample beaker in the slide of the Pick&Place modules
- Beaker adapter for centering the 120 mL sample beaker in the slide of the Pick&Place modules
- PCS
- 1
- Beaker adapter for OMNIS 75 mL sample beaker
- 6.01404.040
- Beaker adapter for centering the 75 mL sample beaker in the slide of the Pick&Place modules
- Beaker adapter for centering the 75 mL sample beaker in the slide of the Pick&Place modules
- PCS
- 1
- Beaker adapter for 150 mL sample beaker
- 6.01404.050
- Beaker adapter for centering the 150 mL sample beaker in the slide of the Pick&Place modules.
- Beaker adapter for centering the 150 mL sample beaker in the slide of the Pick&Place modules.
- PCS
- 1