You have been redirected to your local version of the requested page
ขอใบเสนอราคา
Combustion Oven (TEI)

Combustion Oven (TEI)

2.0136.0600

Combustion Oven (TEI)

en

2.0136.0600
    • Boat Introduction Module, quartz
    • 6.07311.010
    • Boat Introduction Module for the Combustion IC for use with the quartz combustion tube. This module uses a sample boat to transfer samples into the oven for combustion.It also includes a pair of tweezers and a petri dish for handling the sample boat.
    • <p>Boat Introduction Module for the Combustion IC for use with the quartz combustion tube. This module uses a sample boat to transfer samples into the oven for combustion.<br/>It also includes a pair of tweezers and a petri dish for handling the sample boat.</p>
    • PCS
    • 1
    • Boat Introduction Module, ceramic 
    • 6.07311.020
    • Boat Introduction Module for the Combustion IC for use with the ceramic combustion tube. This module uses a sample boat to transfer samples into the oven for combustion.It also includes a pair of tweezers and a petri dish for handling the sample boat.
    • <p>Boat Introduction Module for the Combustion IC for use with the ceramic combustion tube. This module uses a sample boat to transfer samples into the oven for combustion.<br/>It also includes a pair of tweezers and a petri dish for handling the sample boat.</p>
    • PCS
    • 1
    • Liquid Introduction Module, manual (TEI)
    • 6.07311.030
    • The Liquid Introduction Module enables the combustion of liquid samples by using an automatic syringe to inject the sample directly. The module can be used for samples with a boiling point < 420 °C.This module can also guide gaseous or LPG samples into the oven from the GLS Sampler CIC.
    • <p>The Liquid Introduction Module enables the combustion of liquid samples by using an automatic syringe to inject the sample directly. The module can be used for samples with a boiling point &lt; 420 °C.<br/>This module can also guide gaseous or LPG samples into the oven from the GLS Sampler CIC.</p>
    • PCS
    • 1
    • Liquid Introduction Module, automated (TEI)
    • 6.07311.040
    • The Liquid Introduction Module enables the combustion of liquid samples by using the Liquid Autosampler CIC to inject the sample directly. The module can be used for samples with a boiling point < 420 °C.This module can also guide gaseous or LPG samples from the GLS Sampler CIC into the oven.
    • <p>The Liquid Introduction Module enables the combustion of liquid samples by using the Liquid Autosampler CIC to inject the sample directly. The module can be used for samples with a boiling point &lt; 420 °C.<br/>This module can also guide gaseous or LPG samples from the GLS Sampler CIC into the oven.</p>
    • PCS
    • 1
    • Quartz combustion tube (TEI)
    • 6.07311.100
    • Quartz combustion tube for the Combustion Oven (TEI).
    • <p>Quartz combustion tube for the Combustion Oven (TEI).</p>
    • PCS
    • 1
    • Ceramic combustion tube (TEI)
    • 6.07311.110
    • Ceramic combustion tube for the Combustion Oven (TEI).
    • <p>Ceramic combustion tube for the Combustion Oven (TEI).</p>
    • PCS
    • 1
    • Sample cup, quartz, pk=3
    • 6.07311.200
    • Quartz cup for sample injection in Metrohm Combustion IC (TEI), 3 pcs.
    • <p>Quartz cup for sample injection in Metrohm Combustion IC (TEI), 3 pcs.</p>
    • PCS
    • 1
    • Sample cup, quartz, pk=30
    • 6.07311.210
    • Quartz cup for sample injection in Metrohm Combustion IC (TEI), 30 pcs.
    • <p>Quartz cup for sample injection in Metrohm Combustion IC (TEI), 30 pcs.</p>
    • PCS
    • 1
    • Sample cup, ceramic, pk=3
    • 6.07311.220
    • Ceramic cup for sample injection in Metrohm Combustion IC (TEI), 3 pcs.
    • <p>Ceramic cup for sample injection in Metrohm Combustion IC (TEI), 3 pcs.</p>
    • PCS
    • 1
    • Sample cup, ceramic, pk=30
    • 6.07311.230
    • Ceramic cup for sample injection in Metrohm Combustion IC (TEI), 30 pcs.
    • <p>Ceramic cup for sample injection in Metrohm Combustion IC (TEI), 30 pcs.</p>
    • PCS
    • 1
    • Slider boat, quartz
    • 6.07311.240
    • Slider boat for the Boat Introduction Module 6.07311.010, quartz.
    • <p>Slider boat for the Boat Introduction Module 6.07311.010, quartz.</p>
    • PCS
    • 1
    • Slider boat, ceramic
    • 6.07311.250
    • Boat drive for sample boat of the 6.07311.020 Boat Introduction Module, ceramic.
    • <p>Boat drive for sample boat of the 6.07311.020 Boat Introduction Module, ceramic.</p>
    • PCS
    • 1
    • Boat guiding tube
    • 6.07311.260
    • Boat guiding tube for the Boat Introduction Module quartz (6.07311.010) or ceramic (6.07311.020).
    • <p>Boat guiding tube for the Boat Introduction Module quartz (6.07311.010) or ceramic (6.07311.020).</p>
    • PCS
    • 1
    • O-Ring Set (TEI), silicone
    • 6.07311.270
    • O-Ring Set (TEI) for the combustion tube and the guide tubing for the Boat Introduction Module.
    • <p>O-Ring Set (TEI) for the combustion tube and the guide tubing for the Boat Introduction Module.</p>
    • PCS
    • 1
    • Septum for Introduction Module (TEI)
    • 6.07311.290
    • Septum for liquid injection port of the Introduction Modules (TEI) 6.07311.010, 6.07311.020, 6.07311.030, 6.07311.040.
    • <p>Septum for liquid injection port of the Introduction Modules (TEI) 6.07311.010, 6.07311.020, 6.07311.030, 6.07311.040.</p>
    • PCS
    • 1
    • Septum cap Liquid Introduction Module
    • 6.07311.300
    • Lid for fastening the 6.07311.290 septum in place in the Liquid Introduction Module.
    • <p>Lid for fastening the 6.07311.290 septum in place in the Liquid Introduction Module.</p>
    • PCS
    • 1
    • Oxygen and UPW supply tubing (TEI)
    • 6.07311.310
    • Tubing for oxygen and ultrapure water supply at the inlet to the combustion tube (TEI).
    • <p>Tubing for oxygen and ultrapure water supply at the inlet to the combustion tube (TEI).</p>
    • PCS
    • 1
    • Syringe 100 µl manual injection (TEI)
    • 6.07313.100
    • Dosing syringe for manual injection of liquid samples using one of the three Introduction Modules (6.07311.010, 6.07311.020, or 6.07311.030).
    • <p>Dosing syringe for manual injection of liquid samples using one of the three Introduction Modules (6.07311.010, 6.07311.020, or 6.07311.030).</p>
    • PCS
    • 1
    • Replacement needle for CIC (TEI)
    • 6.07313.110
    • Replacement needle (TEI) for dosing syringe for Liquid Autosampler CIC (2.0136.0610) or manual liquid sample injection.
    • <p>Replacement needle (TEI) for dosing syringe for Liquid Autosampler CIC (2.0136.0610) or manual liquid sample injection.</p>
    • PCS
    • 1