Application Finder

The present article addresses the theory, practical aspects and troubleshooting of potentiometry.

Near-Infrared spectroscopy (NIRS) is a widely used analytical technique for quantitative analysis of various products in research and industrial applications. This white paper summarizes the workflow of the development of quantitative methods according to ASTM E1655.

Quality control is impacted by multiple challenges, which can have an influence on the functioning of the QC lab. The present White Paper provides approaches, how to simplify the daily quality control using near-infrared spectroscopy combined with a dedicated smart software like Vision Air.

High-Performance Liquid Chromatography (HPLC) and Ion Chromatography (IC) are commonly used in the pharma, food, and environmental sectors to analyze samples for specific components and to verify compliance with norms and standards. However, users of HPLC may run into the limitations of this technique, e.g., when analyzing standard anions or certain pharmaceutical impurities. This white paper outlines how such challenges can be overcome with IC.

This article describes a simple and sensitive method for chromium(VI) determination in children's toys. The solution to be analyzed is prepared in accordance with DIN EN 71. Not only VIS detection but also post-column derivatization using diphenylcarbizide are parts of this method. The procedure described here is suitable for the precise determination of hexavalent chromium in the single-digit ppt range and, in addition, fulfils without difficulty the limit value of 10 ppt prescribed by the EU directive 2009/48/EC.

This white paper presents six technical tips that you should consider before taking a pH measurement.

The shelf life of foods and beverages depends among other things on the packaging material used. Metals are ideally suitable for packaging, as they can be laminated with various passivating and food-compatible layers. Electrochemical measurements such as Electrochemical Impedance Spectroscopy (EIS) make it possible to check the layers for damage.

This article describes a simple method for the determination of seven standard anions (fluoride, chloride, nitrite, bromide, nitrate, phosphate and sulfate) in accordance with US EPA Method 300 Part A. An IC system is extended to include Inline Ultrafiltration and Inline Eluent Preparation for the analysis.

The pharmaceutical industry is very likely more comprehensively regulated that any other branch of industry. It therefore requires analytic methods that meet the requirements of regulations while at the same time being practical. This applies in particular for large sample quantities, such as are encountered with incoming goods inspections, for example. It is here that particularly rapid and simple analysis methods are called for which make routine analyses simpler and more efficient. This White Paper describes some of the most important regulations in the pharmaceutical analysis and shows how Vis-NIR spectroscopy can solve analytic problems in the pharmaceutical industry in accordance with regulations.

Ion chromatography is a flexible technique with a large selection of intended uses in the pharmaceutical industry. – A few development trends and the latest advances are displayed here.

Heavy metals such as arsenic and mercury find their way into the ground water in many regions of the world, either through natural processes or as the result of human activities. Limit values are exceeded many times over, particularly for arsenic in drinking water, in many areas. This calls for a rigorous monitoring of water quality. The present whitepaper focuses on field determinations of arsenic, mercury, and copper – directly at the sampling site.

Metrohm has shaped moisture analysis for more than half a century. Find out about new developments in water analysis and learn how near-infrared spectroscopy in combination with Karl Fischer titration can increase your sample throughput and boost your productivity.

Surface Enhanced Raman Scattering or SERS is an anomalous enhancement of Raman scattering when molecules are adsorbed to gold or silver nanoparticles – this enhancement can be as large as 107. The advantage of SERS for the analytical chemist lies in its ability to detect analyte concentrations of parts per million and even parts per billion levels, while classical Raman is limited to parts per thousand. Metrohm Raman produces P-SERS assays in the form of nanoparticles printed onto substrates using inkjet technology. This method produces inexpensive test strips that exhibit exceptional stability and sensitivity. There are two markets that can be easily addressed with P-SERS: forensic analysisand food safety. This white paper explains the mechanism of SERS and how it can be applied to handheld Raman analysis with Metrohm Raman Mira systems.

Detection of threatening materials requires robust and sophisticated instruments capable of safe, instantaneous field-analysis of unknowns. In an environment where there is an ever-evolving threat of explosives made from commonlyavailable chemicals, explosive libraries must be customized constantly to include newly targeted materials. Mira DS from Metrohm Raman is the perfect solution for detection of explosives in the field. This handheld Raman instrument is equipped with sophisticated analysis algorithms and a suite of safety features for first responders who need the identity of a potential hazard... NOW! Mira DS and its software can be customized to respond to emerging hazards: this note describes procedures for creating custom libraries of binary explosive precursors to be used in library comparison and mixture matching routines on Mira DS. With these tools, unknown substances can be identified with color-coded warnings for fast action in critical situations.

Chemical manufacturing such as polyurethane production is characterized by a cost intensive production process combined with a negative ecological impact. These adverse effects can be significantly improved by using vibrational spectroscopy. This analytical technique can assist the operator of the plant to reduce costs and minimize the impact onthe environment as is demonstrated in the present white paper.

Data Integrity is currently a hot topic issue that has created much attention and has raised concern within companies working in regulated environments. This White Paper explains some of the key terms used in the context of Data Integrity and outlines how the requirements of Data Integrity can be understood and implemented.

The commercialization of Li-ion batteries in 1991 was the culmination of in-depth R&D conducted by scientists and engineers around the globe over the preceding few decades. Further development of Li-ion batteries and alternative rechargeable batteries has continued until today. As the world is rapidly moving towards a new era defined by green technologies, more practical and accurate R&D is required in order to meet the increasing demands for energy storage systems, specifically from the automotive industry. This white paper presents the basics of the Li-ion battery technology and guides the reader through the relevant techniques and terminologies in Li-ion battery research.

Titration is one of the most commonly used analytical methods. Manual, semiautomated, and fully automated titrationsare well-known options and are examined in detail in several academic studies. This white paper summarizes the advantages and benefits of automated titration in comparison to manual titration. The increase in accuracy and precision of measurements as well as significant time and cost savings are discussed.

«Dissolved oxygen» describes the amount of oxygen molecules (O2) which are dissolved in a liquid phase under certain conditions. In this white paper, two different methods for the analysis of dissolved oxygen, titration and direct measurement, are compared and contrasted to help analysts determine which method is more suitable for their specific applications. Here, we primarily focus on the determination of dissolved O2 in water. However, the same principle applies for other liquid phases such as non-alcoholic or alcoholic beverages.

Ion measurement can be conducted in several different ways, e.g., ion chromatography (IC), inductively coupled plasma optical emission spectrometry (ICP-OES), or atom absorption spectroscopy (AAS). Each of these are well-established, widely used methods in analytical laboratories. However, the initial costs are relatively high. In contrast, ion measurement by the use of an ion-selective electrode (ISE) is a promising alternative to these costly techniques. This White Paper explains the challenges which may be encountered when applying standard addition or direct measurement, and how to overcome them in order for analysts to gain more confidence with this type of analysis.

This Metrohm White Paper shows the requirements demanded of the pharmaceutical industry by the FDA with respect to software products. Implementation examples of the regulations formulated by the FDA in 21 CFR Part 11 are presented using Vision Air Pharma Software.Key words: electronic signatures, audit trails, user management, documentation

In this work, time resolved Raman spectroelectrochemistry measurements with screen printed electrodes are shown. The instrument used combines in a totally integrated box: a 785 nm laser source, a high resolution Raman spectrometer and a bipotentiostat/galvanostat. Experiments are controlled with an excellent spectroelectrochemical software which allows real time data collection and useful data treatment.

Chemometrics is a powerful tool widely used for method development in the pharmaceutical industry. This whitepaper describes the lifecycle of multivariate models and summarizes the workflow of the development of chemometrical models according to the new USP chapter <1039>.

Edible oils comprise a significant portion of any diet, and they also have important roles in the production of foods, cosmetics, and skincare products. For these reasons, a convenient and accurate method for materials identification of a variety of fats and oils is highly desirable. Historically, authentication of fats and oils was performed through intensive laboratory techniques involving chromatographic methods. Here, Raman spectroscopy combined with Principle Component Analysis (PCA) has been used for materials identification with 16 different edible oils, with excellent results. Raman is an ideal technique for evaluation of fats, as carboncarbon double- and single-bonds give strong Raman signals. PCA analysis in combination with Raman spectroscopy is a powerful tool for qualification and verification of different fats and oils, as there are few visual differences between spectra of edible oils.

Analytical Instrument Qualification (AIQ) according to the United States Pharmacopeia (USP) ensures that instruments perform as intended and users may have confidence in data quality. As the Pharma industry adopts handheld Raman instruments for incoming materials identification and verification, producers of such systems must provide suitable calibration and validation routines. Upon completion of these tests, end users are assured that all measurements are in accordance with agreed standards at Metrohm Raman, we have sophisticated AIQ routines in place to confirm the quality of your results.

This White Paper explores the critical role of advanced online and inline process analysis in brine chlorine operations, emphasizing their advantages over traditional methods.

Brad Meadows is Vice President and Lab Director at the US company BSK Labs, which runs a number of environmental laboratories and service centers. Brad is an analytical chemist and has been working in the management of analysis laboratories for 15 years. He shared his experiences with Metrohm ion chromatography with us in the form of some concrete facts and figures.

This white paper differentiates between methods for identification of unknowns and verification of known materials. The goal of this publication is, ultimately, to inform the user of the capabilities of the handheld Metrohm Raman Mira P system. Best practices for building robust training sets for materials verification with Mira P can also be found here.

A person suspected of possessing a narcotic can be charged with a crime only after the identity of the illicit substanceis confirmed. This confirmation is typically provided by analytical chemists in forensic laboratories and requires highly technical separation and detection methods. Unfortunately, such labs often have deep caseloads that lead to delays in testing. Handheld Raman analyzers bring the reliability and accuracy of lab analysis to first responders in the field, allowing for rapid and accurate identification of street drugs with a white powder appearance. With such tools, demand for forensic analysis can be reduced and enforcement agencies can enforce drug policies with greater safety, speed, and precision.

Polymeric sample vials are frequently contaminated with leachable organic or inorganic ions, which originate from the production process or the raw material. These substances can falsify measurement results. The study at hand compares the leaching properties of several vial types from different manufacturers, showing considerable variations in quality and proving the importance of the right choice of vials for ion chromatography (IC). This white paper also provides recommendations and precautions to further reduce leachable contaminants for IC trace analysis.

This white paper summarizes the steps involved in converting an existing manual titration procedure to semi-automated or automated titration procedures. It discusses topics such as selecting the right electrode and titration mode. For a better understanding, the discussion topics are illustrated with three examples.

Sulfites are well-known additives in foods and beverages used to extend shelf life and preserve colors. Such properties have led to the broad usage of sulfites in a range of foodstuffs like fruits, cereals, vegetables, seafood, juices, alcoholic and non-alcoholic (soft) beverages, and in some meat products. The term «sulfites» describes a group of molecules that include sulfur dioxide (SO2) and chemically related molecules like sodium sulfite (Na2SO3), sodium bisulfite (NaHSO3), or sodium metabisulfite (Na2S2O5). Sulfite intake has been correlated with several adverse reactions, and therefore sulfites are included in the FAO/WHO Codex Alimentarius list. Labelling sulfite content in foods and beverages is necessary when the total concentration exceeds 10 mg/kg. Metrohm ion chromatography allows the reliable measurement of sulfite in different matrices using either conductivity or amperometric detection. The inclusion of automated sample preparation and cleaning steps with Metrohm instrumentation saves additional analyst time and helps increase sample throughput.

In this White Paper, details of the electronic (PGSTAT) and electrochemical cell grounding are presented together with the necessity of using a floating PGSTAT for different application and experimental examples. Due to the wide variation of experimental requirements and kinds of electrochemical cells, the use of an electrochemical instrument with a selectable floating feature (such as VIONIC) which brings additional versatility to the user is recommended.

Handheld Raman is ever evolving. The combination of large libraries, a compact and easy-to-use system, and predictive Hazmat software make MIRA DS a powerful tool for defense and security professionals. Identify on-site materials, get hazard information, and make quick decisions about response to dangerous situations.

The fermentation of corn starch to produce ethanol is a complex biochemical process that requires monitoring of many different parameters (e.g., solids, pH, sugar profile, glycerol, lactic and acetic acid, and water and ethanol content). Traditional laboratory analysis using primary methods (e.g. Karl Fischer titration) takes about an hour to complete and is a limiting step for increasing plant capacity and efficiency. As a fast and non-destructive analytical technique, near-infrared spectroscopy (NIRS) can replace routine laboratory analysis, decreasing operating costs and increasing plant efficiency and capacity. This White Paper describes the capabilities of the modern analytical method near-infrared (NIR) spectroscopy for monitoring and improving the fermentation process of corn to ethanol.

Haemophilus influenzae type B (Hib) is a major cause of bacterial meningitis in children in many countries. The capsular polysaccharide (PS) of Hib plays an important role in the virulence of the organism. The polysaccharide capsule hides cell surface components from elements of the mammalian immune system, such as antibodies and complement proteins that otherwise would activate mechanisms to kill the pathogen. Vaccines require rigorous characterization and assays to ensure final product quality and consistency. For glycoconjugate vaccines, it is important to measure both free and total PS to ensure the quality. A large amount of unconjugated PS may suppress immunity to the antigen. Additionally, the presence of free PS is a key indicator of process consistency. Current methods to determine PS content in vaccines such as Hib are imprecise and unreliable, especially if the vaccine contains a sugar stabilizer (e.g. lactose). Ion chromatography with pulsed amperometric detection (IC-PAD, or HPAEC-PAD) offers a simpler procedure and better sensitivity than other assays to quantify PS (here, polyribosylribitol phosphate [PRP]) in Hib vaccine.

This White Paper introduces the principles of cyclic voltammetry (CV) and the various ways it can be used for catalyst investigation. A case study and helpful glossary are provided to support your understanding.

This White Paper introduces seamless measurements that are possible with VIONIC powered by INTELLO and applications that can benefit from this unique feature. The combination of software and new generation electronics provides data in real-time with no gaps or missed reactions.

This white paper presents IC-MS as powerful analysis technique. This multiparameter method determines various analytes such as inorganic cations and amines in one run.

Monitor adsorbable organic halogens (AOX) in water using combustion ion chromatography (CIC) for precise analysis of AOCl, AOBr, AOI, and total AOX.

White paper about Raman spectroscopy and electrochemistry and their combination (electrochemical Raman).

Voltammetry (VA) is a fast and established method for testing the remaining antioxidant content in industrial lubricants. The flexible and modular Metrohm VA system setup discussed in this White Paper delivers more repeatable and more reproducible results which fulfill all ASTM requirements. Additionally, users can automate the complete analysis process which makes it possible to run series of samples completely unattended.

This White Paper focuses on selected IC-MS applications for the straightforward identification and quantification of organic acids and inorganic anions in different matrices.

White paper on monitoring corrosion and the benefits of online or inline chemical analysis over manual sampling and offline laboratory methods for corrosion monitoring. Online and inline process application solutions for corrosion prevention with related application notes for further information are presented.

This White Paper compares automated Inline Ultrafiltration and Inline Dialysis to the traditional Carrez clarification procedure for the analysis of milk samples by ion chromatography (IC). A continuous test series over approximately six months proved Inline Dialysis to be a reliable and valuable alternative to treat dairy products prior to IC analysis.

This White Paper will walk you through the selection process of ion chromatography as the best analytical tool in the product development of a cell-based gene therapy.

The USP and FDA started to modernize several monographs and General Chapters. In many cases, IC-focused methods have replaced older, wet chemistry procedures. Learn more about the USP modernization initiative and the advantages of ion chromatography in this white paper.

This White Paper gives an overview of the energy-intensive nitrification process that converts ammonia into less harmful nitrogen compounds at wastewater treatment plants (WWTPs). It displays the results from a field test at a WWTP, showcasing the positive influence of single-method process analyzers on the efficiency of the nitrification process.

This White Paper discusses the concept and benefits of NIR spectroscopy and outlines several real-life laboratory application examples with the use of OMNIS NIRS, the cutting-edge NIR spectrometer from Metrohm.

This White Paper discusses USP <1225> and how ion chromatography determines active ingredients in pharma products (assays) as well as identifies impurities and degradation components.