You have been redirected to your local version of the requested page
Request quote
"ProfIC 9 – Cation" – Professional IC System for trace analysis with Inline Calibration, Sample Preconcentration and Matrix Elimination

"ProfIC 9 – Cation" – Professional IC System for trace analysis with Inline Calibration, Sample Preconcentration and Matrix Elimination

ProfIC 9 - Cation

"ProfIC 9 – Cation" – Professional IC System for trace analysis with Inline Calibration, Sample Preconcentration and Matrix Elimination

en

ProfIC 9 - Cation
This product has been discontinued, but is still supported.
    • 800 Dosino
    • 2.800.0010
    • The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).
    • <p>The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).</p>
    • PCS
    • 1
    • IC Conductivity Detector
    • 2.850.9010
    • Compact and intelligent high performance conductivity detector for intelligent IC instruments. Outstanding temperature stability, the complete signal processing within the protected detector block and the latest generation of DSP – Digital Signal Processing – guarantee the highest precision of the measurement. No change of measuring ranges (not even automatic ones) is required, due to the dynamic working range.
    • <p>Compact and intelligent high performance conductivity detector for intelligent IC instruments. Outstanding temperature stability, the complete signal processing within the protected detector block and the latest generation of DSP – Digital Signal Processing – guarantee the highest precision of the measurement. No change of measuring ranges (not even automatic ones) is required, due to the dynamic working range.</p>
    • PCS
    • 1
    • 858 Professional Sample Processor
    • 2.858.0010
    • The 858 Professional Sample Processor processes samples from 500 µL to 500 mL. The sample transfer takes place either by means of a peristaltic pump on the 850 Professional IC system or with an 800 Dosino.
    • <p>The 858 Professional Sample Processor processes samples from 500 µL to 500 mL. The sample transfer takes place either by means of a peristaltic pump on the 850 Professional IC system or with an 800 Dosino.</p>
    • PCS
    • 1
    • Metrosep I Trap 1 - 100/4.0
    • 6.1014.200
    • The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic, i.e. cationic and anionic, contaminants from aqueous solutions. Its use is especially recommended for the purification of the transfer water in combination with "MISP" or "Metrohm Inline Sample Preparation". Using the Metrosep I Trap 1 - 100/4.0 column can significantly reduce the influence of the transfer water on the system blank.
    • <p>The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic, i.e. cationic and anionic, contaminants from aqueous solutions. Its use is especially recommended for the purification of the transfer water in combination with "MISP" or "Metrohm Inline Sample Preparation". Using the Metrosep I Trap 1 - 100/4.0 column can significantly reduce the influence of the transfer water on the system blank.</p>
    • PCS
    • 1
    • 807 Dosing Unit 10 mL
    • 6.3032.210
    • 807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 1
    • IC equipment for Liquid Handling with the Dosino
    • 6.5330.040
    • Accessories set for mounting a Dosino on intelligent IC instruments for Liquid Handling.
    • <p>Accessories set for mounting a Dosino on intelligent IC instruments for Liquid Handling.</p>
    • PCS
    • 1
    • "ProfIC Vario 9 Cation" – Professional IC Vario system with Metrohm's intelligent preconcentration technique and Inline Matrix Elimination (MiPCT-ME)
    • ProfIC Vario 9 Cation
    • The Professional IC Vario system with Metrohm's intelligent inline preconcentration technique, Inline Matrix Elimination and conductivity detection enables ultratrace analysis down to the lowest ppt range (ng/L) of cations in complex matrices.Typical areas of application:Ultratrace analysis in samples from nuclear power plants and conventional power plants; Trace and ultratrace analysis in extraction agents and organics; Trace analysis in snow and ice; Schematic representationInstallation instructions
    • <p>The Professional IC Vario system with <strong>Metrohm's intelligent inline preconcentration technique</strong>, <strong>Inline Matrix Elimination</strong> and <strong>conductivity detection </strong>enables ultratrace analysis down to the lowest ppt range (ng/L) of cations in complex matrices.<br /><br />Typical areas of application:</p><ul><li>Ultratrace analysis in samples from nuclear power plants and conventional power plants</li><li>Trace and ultratrace analysis in extraction agents and organics</li><li>Trace analysis in snow and ice</li></ul><p><a href="https://metrohm.scene7.com//is/image/metrohm/ProfIC%20Vario_9_Cat?$xh-1280$"> Schematic representation</a></p><p><a href="https://www.metrohm.com/applications/ab-application-bulletins/ab-384.html">Installation instructions</a></p>
    • PCS
    • 1
    • 800 Dosino
    • 2.800.0010
    • The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).
    • <p>The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).</p>
    • PCS
    • 1
    • IC Conductivity Detector
    • 2.850.9010
    • Compact and intelligent high performance conductivity detector for intelligent IC instruments. Outstanding temperature stability, the complete signal processing within the protected detector block and the latest generation of DSP – Digital Signal Processing – guarantee the highest precision of the measurement. No change of measuring ranges (not even automatic ones) is required, due to the dynamic working range.
    • <p>Compact and intelligent high performance conductivity detector for intelligent IC instruments. Outstanding temperature stability, the complete signal processing within the protected detector block and the latest generation of DSP – Digital Signal Processing – guarantee the highest precision of the measurement. No change of measuring ranges (not even automatic ones) is required, due to the dynamic working range.</p>
    • PCS
    • 1
    • 858 Professional Sample Processor
    • 2.858.0010
    • The 858 Professional Sample Processor processes samples from 500 µL to 500 mL. The sample transfer takes place either by means of a peristaltic pump on the 850 Professional IC system or with an 800 Dosino.
    • <p>The 858 Professional Sample Processor processes samples from 500 µL to 500 mL. The sample transfer takes place either by means of a peristaltic pump on the 850 Professional IC system or with an 800 Dosino.</p>
    • PCS
    • 1
    • Metrosep I Trap 1 - 100/4.0
    • 6.1014.200
    • The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic, i.e. cationic and anionic, contaminants from aqueous solutions. Its use is especially recommended for the purification of the transfer water in combination with "MISP" or "Metrohm Inline Sample Preparation". Using the Metrosep I Trap 1 - 100/4.0 column can significantly reduce the influence of the transfer water on the system blank.
    • <p>The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic, i.e. cationic and anionic, contaminants from aqueous solutions. Its use is especially recommended for the purification of the transfer water in combination with "MISP" or "Metrohm Inline Sample Preparation". Using the Metrosep I Trap 1 - 100/4.0 column can significantly reduce the influence of the transfer water on the system blank.</p>
    • PCS
    • 1
    • 807 Dosing Unit 10 mL
    • 6.3032.210
    • 807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 1
    • IC equipment for Liquid Handling with the Dosino
    • 6.5330.040
    • Accessories set for mounting a Dosino on intelligent IC instruments for Liquid Handling.
    • <p>Accessories set for mounting a Dosino on intelligent IC instruments for Liquid Handling.</p>
    • PCS
    • 1
    • "ProfIC Vario 9 Cation" – Professional IC Vario system with Metrohm's intelligent preconcentration technique and Inline Matrix Elimination (MiPCT-ME)
    • ProfIC Vario 9 Cation
    • The Professional IC Vario system with Metrohm's intelligent inline preconcentration technique, Inline Matrix Elimination and conductivity detection enables ultratrace analysis down to the lowest ppt range (ng/L) of cations in complex matrices.Typical areas of application:Ultratrace analysis in samples from nuclear power plants and conventional power plants; Trace and ultratrace analysis in extraction agents and organics; Trace analysis in snow and ice; Schematic representationInstallation instructions
    • <p>The Professional IC Vario system with <strong>Metrohm's intelligent inline preconcentration technique</strong>, <strong>Inline Matrix Elimination</strong> and <strong>conductivity detection </strong>enables ultratrace analysis down to the lowest ppt range (ng/L) of cations in complex matrices.<br /><br />Typical areas of application:</p><ul><li>Ultratrace analysis in samples from nuclear power plants and conventional power plants</li><li>Trace and ultratrace analysis in extraction agents and organics</li><li>Trace analysis in snow and ice</li></ul><p><a href="https://metrohm.scene7.com//is/image/metrohm/ProfIC%20Vario_9_Cat?$xh-1280$"> Schematic representation</a></p><p><a href="https://www.metrohm.com/applications/ab-application-bulletins/ab-384.html">Installation instructions</a></p>
    • PCS
    • 1
    • Metrosep C PCC 1 HC/4.0
    • 6.1010.310
    • For cation preconcentration and matrix elimination
    • For cation preconcentration and matrix elimination
    • PCS
    • 1
    • Metrosep C 4 - 150/4.0
    • 6.1050.420
    • The Metrosep C 4 - 150/4.0 is the universal standard column in cation analysis for accomplishing high separating efficiency in a short time. The Metrosep C 4 - 150/4.0 is the ideal separation column for the analysis of alkaline and earth alkaline metals in aqueous media.
    • <p>The Metrosep C 4 - 150/4.0 is the universal standard column in cation analysis for accomplishing high separating efficiency in a short time. The Metrosep C 4 - 150/4.0 is the ideal separation column for the analysis of alkaline and earth alkaline metals in aqueous media.</p>
    • PCS
    • 1
    • Metrosep C 4 Guard/4.0
    • 6.1050.500
    • The Metrosep C 4 Guard/4.0 contains the C-4 column material and is used to protect all Metrosep cation columns that have a substrate based on silica gel. Particles and contamination are reliably retained, considerably prolonging the service life of the analytical separation column. The economical price is an additional plus. The Metrosep C 4 Guard/4.0 also works based on the "On Column Guard System" and is screwed directly onto the separation column with virtually no dead volume.
    • <p>The Metrosep C 4 Guard/4.0 contains the C-4 column material and is used to protect all Metrosep cation columns that have a substrate based on silica gel. Particles and contamination are reliably retained, considerably prolonging the service life of the analytical separation column. The economical price is an additional plus. The Metrosep C 4 Guard/4.0 also works based on the "On Column Guard System" and is screwed directly onto the separation column with virtually no dead volume.</p>
    • PCS
    • 1
    • Bottle / 300 mL
    • 6.1608.080
    • Rinsing vessel for IC Sample Processors.
    • <p>Rinsing vessel for IC Sample Processors.</p>
    • PCS
    • 1
    • Sample rack, 16 x 100 mL, (PVC)
    • 6.2041.390
    • Sample rack for 810 Sample Changer, 814 USB Sample Processor, 855 Robotic Titrosampler "Light", suitable for 16 sample beakers. The following sample beakers can be used: 100 mL beakers, short.Plastic: Polyvinyl chloride (PVC)
    • <p>Sample rack for 810 Sample Changer, 814 USB Sample Processor, 855 Robotic Titrosampler "Light", suitable for 16 sample beakers. The following sample beakers can be used: 100 mL beakers, short.</p><p>Plastic: Polyvinyl chloride (PVC)</p>
    • PCS
    • 1
    • Al foil
    • 6.2820.000
    • 1000 circular sheets of 80 mm diameter. Thickness: 0.010 mm. Used together with 6.2037.030 Foil holder for 6.1432.210 Sample beaker. For 674 KF Sample Changer
    • 1000 circular sheets of 80 mm diameter. Thickness: 0.010 mm. Used together with 6.2037.030 Foil holder for 6.1432.210 Sample beaker. For 674 KF Sample Changer
    • PCS
    • 1
    • IQ/OQ Kit for IC
    • 6.5333.000
    • The IQ/OQ Kit contains all parts and standard solutions required for IQ/OQ in ion chromatography.
    • The IQ/OQ Kit contains all parts and standard solutions required for IQ/OQ in ion chromatography.
    • PCS
    • 1
    • Connection set to 807 Dosing Unit: Port 4
    • 6.5620.000
    • For the connection of an M6 tubing to Port 4 on an 807 Dosing Unit (transition from luer to M6), including holder safety device 
    • <p>For the connection of an M6 tubing to Port 4 on an 807 Dosing Unit (transition from luer to M6), including holder safety device</p><p> </p>
    • PCS
    • 1