You have been redirected to your local version of the requested page
Request quote
TitrIC Vario pro I – The basic hyphenated system for IC and titration

TitrIC Vario pro I – The basic hyphenated system for IC and titration

TitrIC Vario pro I

This product has been discontinued, but is still supported.
    • /shared/en/products/2/7860/27860040
    • 786 Swing Head
    • https://s7e5a.scene7.com/is/image/metrohm/3334_s?$sq-500$&bfc=on
    • 2.786.0040
    • Additional equipment for Robotic Sample Processors XL without titration or transfer heads.
    • Additional equipment for Robotic Sample Processors XL without titration or transfer heads.
    • PCS
    • 1
    • /shared/en/products/2/8000/28000010
    • 800 Dosino
    • https://s7e5a.scene7.com/is/image/metrohm/2127_s?$sq-500$&bfc=on
    • 2.800.0010
    • The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).
    • <p>The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).</p>
    • PCS
    • 4
    • /shared/en/products/2/8020/28020020
    • 802 Stirrer for sample changer
    • https://metrohm.scene7.com/is/image/metrohm/1740_s?$sq-500$&bfc=on
    • 2.802.0020
    • Rod stirrer for sample changer and Sample Processor.With 104 mm 6.1909.020 stirring propeller and permanently installed cable.
    • <p>Rod stirrer for sample changer and Sample Processor.</p><p>With 104 mm 6.1909.020 stirring propeller and permanently installed cable.</p>
    • PCS
    • 1
    • /shared/en/products/2/8150/28150020
    • 815 Robotic USB Sample Processor XL (1T/2P)
    • https://s7e5a.scene7.com/is/image/metrohm/2874_s?$sq-500$&bfc=on
    • 2.815.0020
    • Robotic USB Sample Processor XL with one workstation and two built-in membrane pumps for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. Up to three dosing devices for Liquid Handling tasks can be connected.Because of the multitude of application variants, rack, stirrer, titration head, robotic arm, Swing Head and sample vessels must be tailored to the application and ordered separately.The control is "stand alone" using Touch Control. The following software products can be selected for the PC control: tiamo™ titration software, MagIC Net chromatography software, viva voltammetry software, or OMNIS. 
    • <p>Robotic USB Sample Processor XL with one workstation and two built-in membrane pumps for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. Up to three dosing devices for Liquid Handling tasks can be connected.<br/> <br/>Because of the multitude of application variants, rack, stirrer, titration head, robotic arm, Swing Head and sample vessels must be tailored to the application and ordered separately.</p><p>The control is "stand alone" using Touch Control. The following software products can be selected for the PC control: tiamo™ titration software, MagIC Net chromatography software, viva voltammetry software, or OMNIS.<br/> </p>
    • PCS
    • 1
    • /shared/en/products/2/8540/28540010
    • 854 iConnect
    • https://s7e5a.scene7.com/is/image/metrohm/2122_s?$sq-500$&bfc=on
    • 2.854.0010
    • The 854 iConnect – Electrode cable and measuring amplifier for intelligent "iTrodes" electrodes (cable length 150 cm).
    • <p>The 854 iConnect – Electrode cable and measuring amplifier for intelligent "iTrodes" electrodes (cable length 150 cm).</p>
    • PCS
    • 1
    • /shared/en/products/2/8560/28560010
    • 856 Conductivity Module
    • https://s7e5a.scene7.com/is/image/metrohm/2591_s?$sq-500$&bfc=on
    • 2.856.0010
    • Conductivity measuring module as supplement to an existing Titrando system or "stand-alone" in combination with a 900 Touch Control. With the 856 Conductivity Module, not only conductivity and temperature can be determined, but also TDS and salinity. It supports state-of-the-art conductivity measuring cells, i.e. 5-ring measuring cells. The Conductivity Module is equipped with two USB interfaces for connecting printers, barcode readers, or sample changers and four MSB interfaces for stirrers or Dosinos.For use with OMNIS Software, tiamo software, or Touch Control unit. Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required.
    • <p>Conductivity measuring module as supplement to an existing Titrando system or "stand-alone" in combination with a 900 Touch Control. With the 856 Conductivity Module, not only conductivity and temperature can be determined, but also TDS and salinity. It supports state-of-the-art conductivity measuring cells, i.e. 5-ring measuring cells. <br/><br/>The Conductivity Module is equipped with two USB interfaces for connecting printers, barcode readers, or sample changers and four MSB interfaces for stirrers or Dosinos.<br/>For use with OMNIS Software, tiamo software, or Touch Control unit. Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required.</p>
    • PCS
    • 1
    • /shared/en/products/2/9050/29050020
    • 905 Titrando
    • https://metrohm.scene7.com/is/image/metrohm/3085_s?$sq-500$&bfc=on
    • 2.905.0020
    • High-end titrator for potentiometric titration with two measuring interfaces for use with Dosino dosing systems. up to four dosing systems of the 800 Dosino type; dynamic (DET), monotonic (MET), and endpoint titration (SET); Measurement with ion-selective electrodes (MEAS CONC); Dosing functions with monitoring, Liquid Handling; four MSB connectors for additional stirrers or dosing systems; "iTrode" intelligent electrodes; USB connector; For use with OMNIS Software, tiamo software, or Touch Control unit; Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required;  
    • <p>High-end titrator for potentiometric titration with two measuring interfaces for use with Dosino dosing systems.<br/> </p><ul><li>up to four dosing systems of the 800 Dosino type</li><li>dynamic (DET), monotonic (MET), and endpoint titration (SET)</li><li>Measurement with ion-selective electrodes (MEAS CONC)</li><li>Dosing functions with monitoring, Liquid Handling</li><li>four MSB connectors for additional stirrers or dosing systems</li><li>"iTrode" intelligent electrodes</li><li>USB connector</li><li>For use with OMNIS Software, <em>tiamo</em> software, or Touch Control unit</li><li>Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required</li></ul><p> </p>
    • PCS
    • 1
    • /shared/en/products/2/9302/29302560
    • 930 Compact IC Flex Oven/SeS/PP/Deg
    • https://metrohm.scene7.com/is/image/metrohm/3856?$sq-500$&bfc=on
    • 2.930.2560
    • The 930 Compact IC Flex Oven/SeS/PP/Deg is the intelligent Compact IC instrument with column oven, sequential suppression, peristaltic pump for suppressor regeneration and built-in degasser. The instrument can be used with any separation and detection methods.Typical areas of application:Anion or cation determinations with sequential suppression and conductivity detection;
    • <p>The 930 Compact IC Flex Oven/SeS/PP/Deg is the intelligent Compact IC instrument with <strong>column oven</strong>, <strong>sequential suppression</strong>, <strong>peristaltic pump</strong> for suppressor regeneration and built-in <strong>degasser</strong>. The instrument can be used with any separation and detection methods.<br/><br/>Typical areas of application:</p><ul><li>Anion or cation determinations with sequential suppression and conductivity detection</li></ul>
    • PCS
    • 1
    • /shared/en/products/6/0277/60277300
    • iAquatrode Plus with Pt1000
    • https://s7e5a.scene7.com/is/image/metrohm/60277300?$sq-500$&bfc=on
    • 6.0277.300
    • Intelligent, combined pH electrode with integrated memory chip for storing sensor data and with Pt1000 temperature sensor for pH measurements/titrations in ion-deficient aqueous media (e.g., drinking water, process water). This electrode shows a very short response time in these samples. The fixed ground-joint diaphragm is insensitive to contamination. When c(KCl) = 3 mol/L is used as bridge electrolyte, storage in storage solution is recommended.The bridge electrolyte can be easily replaced with a chloride-free electrolyte (e.g., potassium nitrate c(KNO3) = 1 mol/L (6.2310.010)). Storage in the used bridge electrolyte.iTrodes can be connected to Titrando, Ti-Touch, or 913/914 meters.
    • <p>Intelligent, combined pH electrode with integrated memory chip for storing sensor data and with Pt1000 temperature sensor for pH measurements/titrations in ion-deficient aqueous media (e.g., drinking water, process water). This electrode shows a very short response time in these samples. <br/><br/>The fixed ground-joint diaphragm is insensitive to contamination. <br/>When c(KCl) = 3 mol/L is used as bridge electrolyte, storage in storage solution is recommended.<br/>The bridge electrolyte can be easily replaced with a chloride-free electrolyte (e.g., potassium nitrate c(KNO<sub>3</sub>) = 1 mol/L (6.2310.010)). Storage in the used bridge electrolyte.<br/>iTrodes can be connected to Titrando, Ti-Touch, or 913/914 meters.</p>
    • PCS
    • 1
    • /shared/en/products/6/0510/60510100
    • Combined polymer membrane electrode, Ca
    • https://s7e5a.scene7.com/is/image/metrohm/60510100_s?$sq-500$&bfc=on
    • 6.0510.100
    • Combined calcium-selective electrode with polymer membrane.This ISE is suitable for: ion measurements of Ca2+ (5*10-7 to 1 mol/L) in aqueous solutions; complexometric (back) titrations (e.g., determination of water hardness) ; Thanks to a robust/break-proof plastic shaft made of propylene and an impact protection for the polymer membrane, this sensor is mechanically very resistant.The reference electrolyte used is c(NH4NO3) = 1 mol/L.
    • <p>Combined calcium-selective electrode with polymer membrane.<br/>This ISE is suitable for:<br/> </p><ul><li>ion measurements of Ca<sup>2+</sup> (5*10<sup>-7</sup> to 1 mol/L) in aqueous solutions</li><li>complexometric (back) titrations (e.g., determination of water hardness)<br/> </li></ul><p>Thanks to a robust/break-proof plastic shaft made of propylene and an impact protection for the polymer membrane, this sensor is mechanically very resistant.<br/>The reference electrolyte used is c(NH<sub>4</sub>NO<sub>3</sub>) = 1 mol/L.</p>
    • PCS
    • 1
    • /shared/en/products/6/0915/60915100
    • 5-ring conductivity measuring cell c = 0.7 cm-1 with Pt1000 (fixed cable)
    • https://s7e5a.scene7.com/is/image/metrohm/60915100?$sq-500$&bfc=on
    • 6.0915.100
    • 5-ring conductivity measuring cell with cell constant c = 0.7 cm-1 (guide value), with integrated Pt1000 temperature sensor and with fixed cable (1.2 m) for connecting to an 856 Conductivity Module.This sensor is suitable for measurements of medium conductivities (5 µS/cm to 20 mS/cm), e.g., in:drinking water; surface water; wastewater;  
    • <p>5-ring conductivity measuring cell with cell constant c = 0.7 cm<sup>-1 </sup>(guide value), with integrated Pt1000 temperature sensor and with fixed cable (1.2 m) for connecting to an 856 Conductivity Module.<br />This sensor is suitable for measurements of medium conductivities (5 &micro;S/cm to 20 mS/cm), e.g., in:</p><ul><li>drinking water</li><li>surface water</li><li>wastewater</li></ul><p>&nbsp;</p>
    • PCS
    • 1
    • /shared/en/products/6/1414/61414060
    • Micro titration vessel lid / ECO
    • https://s7e5a.scene7.com/is/image/metrohm/61414060?$sq-500$&bfc=on
    • 6.1414.060
    • PCS
    • 1
    • /shared/en/products/6/1415/61415250
    • Titration vessel / 50-150 mL
    • https://metrohm.scene7.com/is/image/metrohm/61415250?$sq-500$&bfc=on
    • 6.1415.250
    • PCS
    • 1
    • /shared/en/products/6/1462/61462040
    • Robotic arm with transfer head for 786 Swing Head, right swinging
    • https://s7e5a.scene7.com/is/image/metrohm/61462040?$sq-500$&bfc=on
    • 6.1462.040
    • Transfer robotic arm for liquid handling purposes
    • Transfer robotic arm for liquid handling purposes
    • PCS
    • 1
    • /shared/en/products/6/1543/61543170
    • Aspiration tip / M8 thread
    • https://s7e5a.scene7.com/is/image/metrohm/61543170?$sq-500$&bfc=on
    • 6.1543.170
    • Aspiration tip for the Sample Processors.
    • <p>Aspiration tip for the Sample Processors.</p>
    • PCS
    • 1
    • /shared/en/products/6/1543/61543210
    • 3-way stopper with antidiffusion valve
    • https://s7e5a.scene7.com/is/image/metrohm/61543210?$sq-500$&bfc=on
    • 6.1543.210
    • Stopper with three buret tips for connecting 3 x M6 tubing
    • Stopper with three buret tips for connecting 3 x M6 tubing
    • PCS
    • 1
    • /shared/en/products/6/1608/61608030
    • Round glass bottle / 1000 mL / GL 45
    • https://s7e5a.scene7.com/is/image/metrohm/61608030?$sq-500$&bfc=on
    • 6.1608.030
    • PCS
    • 3
    • /shared/en/products/6/1618/61618020
    • Thread adapter S 40 to GL 45
    • https://s7e5a.scene7.com/is/image/metrohm/61618020?$sq-500$&bfc=on
    • 6.1618.020
    • Adapter for bottles with S40 thread (Merck...) to GL45.
    • Adapter for bottles with S40 thread (Merck...) to GL45.
    • PCS
    • 1
    • /shared/en/products/6/1805/61805030
    • FEP tubing / M6 / 150 cm
    • https://s7e5a.scene7.com/is/image/metrohm/61805010?$sq-500$&bfc=on
    • 6.1805.030
    • With light and kink protection
    • With light and kink protection
    • PCS
    • 1
    • /shared/en/products/6/1805/61805060
    • FEP tubing / M6 / 60 cm
    • https://s7e5a.scene7.com/is/image/metrohm/61805010?$sq-500$&bfc=on
    • 6.1805.060
    • With light and kink protection
    • With light and kink protection
    • PCS
    • 3
    • /shared/en/products/6/1805/61805110
    • FEP tubing / M6 / 80 cm
    • https://s7e5a.scene7.com/is/image/metrohm/61805010?$sq-500$&bfc=on
    • 6.1805.110
    • With light and kink protection
    • With light and kink protection
    • PCS
    • 2
    • /shared/en/products/6/1808/61808010
    • Coupling piece 2 X M6
    • https://s7e5a.scene7.com/is/image/metrohm/61808010?$sq-500$&bfc=on
    • 6.1808.010
    • 2 M6 outer threads. Part of the screw connections for Exchange Units and 676 Sample Changer
    • 2 M6 outer threads. Part of the screw connections for Exchange Units and 676 Sample Changer
    • PCS
    • 1
    • /shared/en/products/6/1808/61808060
    • T connector / M6 inner
    • https://s7e5a.scene7.com/is/image/metrohm/61808060?$sq-500$&bfc=on
    • 6.1808.060
    • 3 M6 inner threads.
    • <p>3 M6 inner threads.</p>
    • PCS
    • 1
    • /shared/en/products/6/1808/61808280
    • Adapter 807 Dosing Unit Port 4, M6 inner 
    • https://preview3.assetsadobe.com/is/image/metrohm/61808280_s?$sq-500$&bfc=on
    • 6.1808.280
    • Adapter for using Port 4 of the 807 dosing Unit for connection with an FEP tubing / M6.
    • <p>Adapter for using Port 4 of the 807 dosing Unit for connection with an FEP tubing / M6.</p>
    • PCS
    • 1
    • /shared/en/products/6/1835/61835050
    • PEEK sample tube
    • https://s7e5a.scene7.com/is/image/metrohm/61835050?$sq-500$&bfc=on
    • 6.1835.050
    • For sample changers for transferring larger-sized sample volumes, e.g. for brightener determination.
    • For sample changers for transferring larger-sized sample volumes, e.g. for brightener determination.
    • PCS
    • 1
    • /shared/en/products/6/2001/62001070
    • Support stand for Sample Processors
    • https://s7e5a.scene7.com/is/image/metrohm/62001070?$sq-500$&bfc=on
    • 6.2001.070
    • Support stand for Sample Processors, for external titrations and dilutions (IC)
    • Support stand for Sample Processors, for external titrations and dilutions (IC)
    • PCS
    • 1
    • /shared/en/products/6/2057/62057210
    • Holder for Dosino to IC instruments
    • https://s7e5a.scene7.com/is/image/metrohm/62057210?$sq-500$&bfc=on
    • 6.2057.210
    • Mounting part for Dosinos at the IC instrument housing.
    • Mounting part for Dosinos at the IC instrument housing.
    • PCS
    • 1
    • /shared/en/products/6/2061/62061010
    • Bottle holder for Dosinos
    • https://s7e5a.scene7.com/is/image/metrohm/62061010?$sq-500$&bfc=on
    • 6.2061.010
    • Bottle holder for up to two Dosinos, mounted on 1 L reagent bottles.
    • Bottle holder for up to two Dosinos, mounted on 1 L reagent bottles.
    • PCS
    • 1
    • /shared/en/products/6/2104/62104020
    • Electrode cable / 1 m / F
    • https://s7e5a.scene7.com/is/image/metrohm/62104020?$sq-500$&bfc=on
    • 6.2104.020
    • For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).
    • For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).
    • PCS
    • 1
    • /shared/en/products/6/2134/62134040
    • RS-232 DB9 - IBM-PC(DB9) connecting cable
    • https://s7e5a.scene7.com/is/image/metrohm/62134040?$sq-500$&bfc=on
    • 6.2134.040
    • For the Metrohm RS-232 interface - PC connection. For Titrinos, Titrino plus and 756, 831 KF Coulometer, RS-232/USB Box
    • <p>For the Metrohm RS-232 interface - PC connection. For Titrinos, Titrino plus and 756, 831 KF Coulometer, RS-232/USB Box</p>
    • PCS
    • 1
    • /shared/en/products/6/2148/62148050
    • USB/RS-232 Converter for 900 Touch Control
    • https://s7e5a.scene7.com/is/image/metrohm/62148050?$sq-500$&bfc=on
    • 6.2148.050
    • Extends the 900 Touch Control by an RS-232 interface for the connection of e.g. balance. 
    • Extends the 900 Touch Control by&nbsp;an RS-232 interface for the connection of e.g. balance.&nbsp;
    • PCS
    • 2
    • /shared/en/products/6/2151/62151000
    • Cable USB A – mini-DIN 8-pin
    • https://metrohm.scene7.com/is/image/metrohm/62151000?$sq-500$&bfc=on
    • 6.2151.000
    • Controller cable
    • Controller cable
    • PCS
    • 2
    • /shared/en/products/6/2307/62307230
    • Buffer solutions pH 4, 7 and 9
    • https://metrohm.scene7.com/is/image/metrohm/62307230?$sq-500$&bfc=on
    • 6.2307.230
    • Mixed buffer solutions pH 4.00/7.00/9.00 (25 °C) in single use sachets, colourless, box of 3 x 10 x 30 mL
    • Mixed buffer solutions pH 4.00/7.00/9.00 (25 °C) in single use sachets, colourless, box of 3 x 10 x 30 mL
    • PCS
    • 1
    • /shared/en/products/6/2325/62325000
    • pHit kit
    • https://metrohm.scene7.com/is/image/metrohm/62325000?$sq-500$&bfc=on
    • 6.2325.000
    • Maintenance kit for pH electrodes The kit contains:50 mL cleaning solution; 50 mL 3M KCl solution; 50 mL storage solution; 2 Storage vessels; Instructions for use;
    • <p>Maintenance kit for pH electrodes </p><p>The kit contains:</p><ul><li>50 mL cleaning solution</li><li>50 mL&nbsp;3M KCl solution</li><li>50 mL&nbsp;storage solution</li><li>2 Storage vessels</li><li>Instructions for use</li></ul>
    • PCS
    • 1
    • /shared/en/products/6/2327/62327000
    • Electrolyte NH4NO3 1 mol/L (50 mL)
    • https://metrohm.scene7.com/is/image/metrohm/62327000?$sq-500$&bfc=on
    • 6.2327.000
    • Electrolyte solution c(NH4NO3) =1 mol/L (for combined Ca-ISE 6.0510.100)
    • Electrolyte solution c(NH<SUB>4</SUB>NO<SUB>3</SUB>) =1 mol/L (for combined Ca-ISE 6.0510.100)
    • PCS
    • 1
    • /shared/en/products/6/2629/62629000
    • Screw nut to needle holder IC
    • https://s7e5a.scene7.com/is/image/metrohm/62629000?$sq-500$&bfc=on
    • 6.2629.000
    • On Sample Processors
    • On Sample Processors
    • PCS
    • 1
    • /shared/en/products/6/2709/62709090
    • Stopper
    • https://s7e5a.scene7.com/is/image/metrohm/62709090?$sq-500$&bfc=on
    • 6.2709.090
    • PTFE. Used with 6.5613.000 ECO titration equipment
    • PTFE. Used with 6.5613.000 ECO titration equipment
    • PCS
    • 1
    • /shared/en/products/6/2730/62730020
    • Septum stopper
    • https://s7e5a.scene7.com/is/image/metrohm/62730020?$sq-500$&bfc=on
    • 6.2730.020
    • With E.301.0041 O-ring. For 6.1448.010 Septum and 6.1414.030 Titration vessel lid. Used for KF applications.
    • With E.301.0041 O-ring. For 6.1448.010 Septum and 6.1414.030 Titration vessel lid. Used for KF applications.
    • PCS
    • 1
    • /shared/en/products/6/2730/62730030
    • Stopper
    • https://s7e5a.scene7.com/is/image/metrohm/62730030?$sq-500$&bfc=on
    • 6.2730.030
    • Complete with nipple and O-ring. For 6.1414.030 titration vessel lids. For KF instruments, VA measurement stands, VA Computrace and IC Dilution.
    • <p>Complete with nipple and O-ring. For 6.1414.030 titration vessel lids. For KF instruments, VA measurement stands, VA Computrace and IC Dilution.</p>
    • PCS
    • 5
    • /shared/en/products/6/2730/62730060
    • Screw nipple
    • https://s7e5a.scene7.com/is/image/metrohm/62730060?$sq-500$&bfc=on
    • 6.2730.060
    • PCTFE. With M16 thread. Used with 6.5613.000 ECO titration equipment
    • PCTFE. With M16 thread. Used with 6.5613.000 ECO titration equipment
    • PCS
    • 3
    • /shared/en/products/6/2730/62730080
    • Screw nipple
    • https://s7e5a.scene7.com/is/image/metrohm/62730080?$sq-500$&bfc=on
    • 6.2730.080
    • PCTFE. Used with 6.5613.000 ECO titration equipment with 722 Stirrer
    • PCTFE. Used with 6.5613.000 ECO titration equipment with 722 Stirrer
    • PCS
    • 1
    • /shared/en/products/6/2744/62744070
    • Pressure screw short
    • https://metrohm.scene7.com/is/image/metrohm/62744070?$sq-500$&bfc=on
    • 6.2744.070
    • Short version. With UNF 10/32 connection. 5 pieces. For the connection of PEEK capillaries
    • Short version. With UNF 10/32 connection. 5 pieces. For the connection of PEEK capillaries
    • PCS
    • 1
    • /shared/en/products/6/2744/62744080
    • M6 thread / UNF 10/32 adapter
    • https://s7e5a.scene7.com/is/image/metrohm/62744080?$sq-500$&bfc=on
    • 6.2744.080
    • With M6 outer thread. For IC instruments.
    • <p>With M6 outer thread. For IC instruments.</p>
    • PCS
    • 2
    • /shared/en/products/6/2763/62763000
    • Flow-through cell for the 6.0915.100/6.0920.100
    • https://s7e5a.scene7.com/is/image/metrohm/62763000?$sq-500$&bfc=on
    • 6.2763.000
    • Flow-through cell for the 6.0915.100/6.0920.100 5-ring conductivity measuring cell
    • <p>Flow-through cell for the 6.0915.100/6.0920.100 5-ring conductivity measuring cell</p>
    • PCS
    • 1
    • /shared/en/products/6/2832/62832000
    • MSM Rotor A
    • https://s7e5a.scene7.com/is/image/metrohm/62832000_1?$sq-500$&bfc=on
    • 6.2832.000
    • Suppressor rotor for all IC instruments with MSM (Metrohm Suppressor Module)
    • Suppressor rotor for all IC instruments with MSM (Metrohm Suppressor Module)
    • PCS
    • 1
    • /shared/en/products/6/2833/62833020
    • Needle holder 1/8 in. With tubing connection M6
    • https://s7e5a.scene7.com/is/image/metrohm/62833020?$sq-500$&bfc=on
    • 6.2833.020
    • For Sample Processors. For the connection of FEP tubing with M6 connectors
    • For Sample Processors. For the connection of FEP tubing with M6 connectors
    • PCS
    • 1
    • /shared/en/products/6/2842/62842020
    • Adapter sleeve, MSM
    • https://s7e5a.scene7.com/is/image/metrohm/62842020?$sq-500$&bfc=on
    • 6.2842.020
    • Not only the MSM Rotor A but also the MSM-LC Rotor A can be installed in the rotor housing with the aid of the adapter sleeve.
    • <p>Not only the MSM Rotor A but also the MSM-LC Rotor A can be installed in the rotor housing with the aid of the adapter sleeve.</p>
    • PCS
    • 1
    • /shared/en/products/6/3032/63032210
    • 807 Dosing Unit 10 mL
    • https://metrohm.scene7.com/is/image/metrohm/63032210?$sq-500$&bfc=on
    • 6.3032.210
    • 807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 1
    • /shared/en/products/6/3032/63032220
    • 807 Dosing Unit 20 mL
    • https://metrohm.scene7.com/is/image/metrohm/63032220?$sq-500$&bfc=on
    • 6.3032.220
    • 807 Dosing Unit with integrated data chip with 20 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 20 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 2
    • /shared/en/products/6/3032/63032250
    • 807 Dosing Unit 50 mL
    • https://metrohm.scene7.com/is/image/metrohm/63032250?$sq-500$&bfc=on
    • 6.3032.250
    • 807 Dosing Unit with integrated data chip with 50 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 50 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 1
    • /shared/en/products/2/7860/27860040
    • 786 Swing Head
    • https://s7e5a.scene7.com/is/image/metrohm/3334_s?$sq-500$&bfc=on
    • 2.786.0040
    • Additional equipment for Robotic Sample Processors XL without titration or transfer heads.
    • Additional equipment for Robotic Sample Processors XL without titration or transfer heads.
    • PCS
    • 1
    • /shared/en/products/2/8000/28000010
    • 800 Dosino
    • https://s7e5a.scene7.com/is/image/metrohm/2127_s?$sq-500$&bfc=on
    • 2.800.0010
    • The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).
    • <p>The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).</p>
    • PCS
    • 4
    • /shared/en/products/2/8020/28020020
    • 802 Stirrer for sample changer
    • https://metrohm.scene7.com/is/image/metrohm/1740_s?$sq-500$&bfc=on
    • 2.802.0020
    • Rod stirrer for sample changer and Sample Processor.With 104 mm 6.1909.020 stirring propeller and permanently installed cable.
    • <p>Rod stirrer for sample changer and Sample Processor.</p><p>With 104 mm 6.1909.020 stirring propeller and permanently installed cable.</p>
    • PCS
    • 1
    • /shared/en/products/2/8150/28150020
    • 815 Robotic USB Sample Processor XL (1T/2P)
    • https://s7e5a.scene7.com/is/image/metrohm/2874_s?$sq-500$&bfc=on
    • 2.815.0020
    • Robotic USB Sample Processor XL with one workstation and two built-in membrane pumps for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. Up to three dosing devices for Liquid Handling tasks can be connected.Because of the multitude of application variants, rack, stirrer, titration head, robotic arm, Swing Head and sample vessels must be tailored to the application and ordered separately.The control is "stand alone" using Touch Control. The following software products can be selected for the PC control: tiamo™ titration software, MagIC Net chromatography software, viva voltammetry software, or OMNIS. 
    • <p>Robotic USB Sample Processor XL with one workstation and two built-in membrane pumps for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. Up to three dosing devices for Liquid Handling tasks can be connected.<br/> <br/>Because of the multitude of application variants, rack, stirrer, titration head, robotic arm, Swing Head and sample vessels must be tailored to the application and ordered separately.</p><p>The control is "stand alone" using Touch Control. The following software products can be selected for the PC control: tiamo™ titration software, MagIC Net chromatography software, viva voltammetry software, or OMNIS.<br/> </p>
    • PCS
    • 1
    • /shared/en/products/2/8540/28540010
    • 854 iConnect
    • https://s7e5a.scene7.com/is/image/metrohm/2122_s?$sq-500$&bfc=on
    • 2.854.0010
    • The 854 iConnect – Electrode cable and measuring amplifier for intelligent "iTrodes" electrodes (cable length 150 cm).
    • <p>The 854 iConnect – Electrode cable and measuring amplifier for intelligent "iTrodes" electrodes (cable length 150 cm).</p>
    • PCS
    • 1
    • /shared/en/products/2/8560/28560010
    • 856 Conductivity Module
    • https://s7e5a.scene7.com/is/image/metrohm/2591_s?$sq-500$&bfc=on
    • 2.856.0010
    • Conductivity measuring module as supplement to an existing Titrando system or "stand-alone" in combination with a 900 Touch Control. With the 856 Conductivity Module, not only conductivity and temperature can be determined, but also TDS and salinity. It supports state-of-the-art conductivity measuring cells, i.e. 5-ring measuring cells. The Conductivity Module is equipped with two USB interfaces for connecting printers, barcode readers, or sample changers and four MSB interfaces for stirrers or Dosinos.For use with OMNIS Software, tiamo software, or Touch Control unit. Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required.
    • <p>Conductivity measuring module as supplement to an existing Titrando system or "stand-alone" in combination with a 900 Touch Control. With the 856 Conductivity Module, not only conductivity and temperature can be determined, but also TDS and salinity. It supports state-of-the-art conductivity measuring cells, i.e. 5-ring measuring cells. <br/><br/>The Conductivity Module is equipped with two USB interfaces for connecting printers, barcode readers, or sample changers and four MSB interfaces for stirrers or Dosinos.<br/>For use with OMNIS Software, tiamo software, or Touch Control unit. Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required.</p>
    • PCS
    • 1
    • /shared/en/products/2/9050/29050020
    • 905 Titrando
    • https://metrohm.scene7.com/is/image/metrohm/3085_s?$sq-500$&bfc=on
    • 2.905.0020
    • High-end titrator for potentiometric titration with two measuring interfaces for use with Dosino dosing systems. up to four dosing systems of the 800 Dosino type; dynamic (DET), monotonic (MET), and endpoint titration (SET); Measurement with ion-selective electrodes (MEAS CONC); Dosing functions with monitoring, Liquid Handling; four MSB connectors for additional stirrers or dosing systems; "iTrode" intelligent electrodes; USB connector; For use with OMNIS Software, tiamo software, or Touch Control unit; Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required;  
    • <p>High-end titrator for potentiometric titration with two measuring interfaces for use with Dosino dosing systems.<br/> </p><ul><li>up to four dosing systems of the 800 Dosino type</li><li>dynamic (DET), monotonic (MET), and endpoint titration (SET)</li><li>Measurement with ion-selective electrodes (MEAS CONC)</li><li>Dosing functions with monitoring, Liquid Handling</li><li>four MSB connectors for additional stirrers or dosing systems</li><li>"iTrode" intelligent electrodes</li><li>USB connector</li><li>For use with OMNIS Software, <em>tiamo</em> software, or Touch Control unit</li><li>Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required</li></ul><p> </p>
    • PCS
    • 1
    • /shared/en/products/2/9302/29302560
    • 930 Compact IC Flex Oven/SeS/PP/Deg
    • https://metrohm.scene7.com/is/image/metrohm/3856?$sq-500$&bfc=on
    • 2.930.2560
    • The 930 Compact IC Flex Oven/SeS/PP/Deg is the intelligent Compact IC instrument with column oven, sequential suppression, peristaltic pump for suppressor regeneration and built-in degasser. The instrument can be used with any separation and detection methods.Typical areas of application:Anion or cation determinations with sequential suppression and conductivity detection;
    • <p>The 930 Compact IC Flex Oven/SeS/PP/Deg is the intelligent Compact IC instrument with <strong>column oven</strong>, <strong>sequential suppression</strong>, <strong>peristaltic pump</strong> for suppressor regeneration and built-in <strong>degasser</strong>. The instrument can be used with any separation and detection methods.<br/><br/>Typical areas of application:</p><ul><li>Anion or cation determinations with sequential suppression and conductivity detection</li></ul>
    • PCS
    • 1
    • /shared/en/products/6/0277/60277300
    • iAquatrode Plus with Pt1000
    • https://s7e5a.scene7.com/is/image/metrohm/60277300?$sq-500$&bfc=on
    • 6.0277.300
    • Intelligent, combined pH electrode with integrated memory chip for storing sensor data and with Pt1000 temperature sensor for pH measurements/titrations in ion-deficient aqueous media (e.g., drinking water, process water). This electrode shows a very short response time in these samples. The fixed ground-joint diaphragm is insensitive to contamination. When c(KCl) = 3 mol/L is used as bridge electrolyte, storage in storage solution is recommended.The bridge electrolyte can be easily replaced with a chloride-free electrolyte (e.g., potassium nitrate c(KNO3) = 1 mol/L (6.2310.010)). Storage in the used bridge electrolyte.iTrodes can be connected to Titrando, Ti-Touch, or 913/914 meters.
    • <p>Intelligent, combined pH electrode with integrated memory chip for storing sensor data and with Pt1000 temperature sensor for pH measurements/titrations in ion-deficient aqueous media (e.g., drinking water, process water). This electrode shows a very short response time in these samples. <br/><br/>The fixed ground-joint diaphragm is insensitive to contamination. <br/>When c(KCl) = 3 mol/L is used as bridge electrolyte, storage in storage solution is recommended.<br/>The bridge electrolyte can be easily replaced with a chloride-free electrolyte (e.g., potassium nitrate c(KNO<sub>3</sub>) = 1 mol/L (6.2310.010)). Storage in the used bridge electrolyte.<br/>iTrodes can be connected to Titrando, Ti-Touch, or 913/914 meters.</p>
    • PCS
    • 1
    • /shared/en/products/6/0510/60510100
    • Combined polymer membrane electrode, Ca
    • https://s7e5a.scene7.com/is/image/metrohm/60510100_s?$sq-500$&bfc=on
    • 6.0510.100
    • Combined calcium-selective electrode with polymer membrane.This ISE is suitable for: ion measurements of Ca2+ (5*10-7 to 1 mol/L) in aqueous solutions; complexometric (back) titrations (e.g., determination of water hardness) ; Thanks to a robust/break-proof plastic shaft made of propylene and an impact protection for the polymer membrane, this sensor is mechanically very resistant.The reference electrolyte used is c(NH4NO3) = 1 mol/L.
    • <p>Combined calcium-selective electrode with polymer membrane.<br/>This ISE is suitable for:<br/> </p><ul><li>ion measurements of Ca<sup>2+</sup> (5*10<sup>-7</sup> to 1 mol/L) in aqueous solutions</li><li>complexometric (back) titrations (e.g., determination of water hardness)<br/> </li></ul><p>Thanks to a robust/break-proof plastic shaft made of propylene and an impact protection for the polymer membrane, this sensor is mechanically very resistant.<br/>The reference electrolyte used is c(NH<sub>4</sub>NO<sub>3</sub>) = 1 mol/L.</p>
    • PCS
    • 1
    • /shared/en/products/6/0915/60915100
    • 5-ring conductivity measuring cell c = 0.7 cm-1 with Pt1000 (fixed cable)
    • https://s7e5a.scene7.com/is/image/metrohm/60915100?$sq-500$&bfc=on
    • 6.0915.100
    • 5-ring conductivity measuring cell with cell constant c = 0.7 cm-1 (guide value), with integrated Pt1000 temperature sensor and with fixed cable (1.2 m) for connecting to an 856 Conductivity Module.This sensor is suitable for measurements of medium conductivities (5 µS/cm to 20 mS/cm), e.g., in:drinking water; surface water; wastewater;  
    • <p>5-ring conductivity measuring cell with cell constant c = 0.7 cm<sup>-1 </sup>(guide value), with integrated Pt1000 temperature sensor and with fixed cable (1.2 m) for connecting to an 856 Conductivity Module.<br />This sensor is suitable for measurements of medium conductivities (5 &micro;S/cm to 20 mS/cm), e.g., in:</p><ul><li>drinking water</li><li>surface water</li><li>wastewater</li></ul><p>&nbsp;</p>
    • PCS
    • 1
    • /shared/en/products/6/1414/61414060
    • Micro titration vessel lid / ECO
    • https://s7e5a.scene7.com/is/image/metrohm/61414060?$sq-500$&bfc=on
    • 6.1414.060
    • PCS
    • 1
    • /shared/en/products/6/1415/61415250
    • Titration vessel / 50-150 mL
    • https://metrohm.scene7.com/is/image/metrohm/61415250?$sq-500$&bfc=on
    • 6.1415.250
    • PCS
    • 1
    • /shared/en/products/6/1462/61462040
    • Robotic arm with transfer head for 786 Swing Head, right swinging
    • https://s7e5a.scene7.com/is/image/metrohm/61462040?$sq-500$&bfc=on
    • 6.1462.040
    • Transfer robotic arm for liquid handling purposes
    • Transfer robotic arm for liquid handling purposes
    • PCS
    • 1
    • /shared/en/products/6/1543/61543170
    • Aspiration tip / M8 thread
    • https://s7e5a.scene7.com/is/image/metrohm/61543170?$sq-500$&bfc=on
    • 6.1543.170
    • Aspiration tip for the Sample Processors.
    • <p>Aspiration tip for the Sample Processors.</p>
    • PCS
    • 1
    • /shared/en/products/6/1543/61543210
    • 3-way stopper with antidiffusion valve
    • https://s7e5a.scene7.com/is/image/metrohm/61543210?$sq-500$&bfc=on
    • 6.1543.210
    • Stopper with three buret tips for connecting 3 x M6 tubing
    • Stopper with three buret tips for connecting 3 x M6 tubing
    • PCS
    • 1
    • /shared/en/products/6/1608/61608030
    • Round glass bottle / 1000 mL / GL 45
    • https://s7e5a.scene7.com/is/image/metrohm/61608030?$sq-500$&bfc=on
    • 6.1608.030
    • PCS
    • 3
    • /shared/en/products/6/1618/61618020
    • Thread adapter S 40 to GL 45
    • https://s7e5a.scene7.com/is/image/metrohm/61618020?$sq-500$&bfc=on
    • 6.1618.020
    • Adapter for bottles with S40 thread (Merck...) to GL45.
    • Adapter for bottles with S40 thread (Merck...) to GL45.
    • PCS
    • 1
    • /shared/en/products/6/1805/61805030
    • FEP tubing / M6 / 150 cm
    • https://s7e5a.scene7.com/is/image/metrohm/61805010?$sq-500$&bfc=on
    • 6.1805.030
    • With light and kink protection
    • With light and kink protection
    • PCS
    • 1
    • /shared/en/products/6/1805/61805060
    • FEP tubing / M6 / 60 cm
    • https://s7e5a.scene7.com/is/image/metrohm/61805010?$sq-500$&bfc=on
    • 6.1805.060
    • With light and kink protection
    • With light and kink protection
    • PCS
    • 3
    • /shared/en/products/6/1805/61805110
    • FEP tubing / M6 / 80 cm
    • https://s7e5a.scene7.com/is/image/metrohm/61805010?$sq-500$&bfc=on
    • 6.1805.110
    • With light and kink protection
    • With light and kink protection
    • PCS
    • 2
    • /shared/en/products/6/1808/61808010
    • Coupling piece 2 X M6
    • https://s7e5a.scene7.com/is/image/metrohm/61808010?$sq-500$&bfc=on
    • 6.1808.010
    • 2 M6 outer threads. Part of the screw connections for Exchange Units and 676 Sample Changer
    • 2 M6 outer threads. Part of the screw connections for Exchange Units and 676 Sample Changer
    • PCS
    • 1
    • /shared/en/products/6/1808/61808060
    • T connector / M6 inner
    • https://s7e5a.scene7.com/is/image/metrohm/61808060?$sq-500$&bfc=on
    • 6.1808.060
    • 3 M6 inner threads.
    • <p>3 M6 inner threads.</p>
    • PCS
    • 1
    • /shared/en/products/6/1808/61808280
    • Adapter 807 Dosing Unit Port 4, M6 inner 
    • https://preview3.assetsadobe.com/is/image/metrohm/61808280_s?$sq-500$&bfc=on
    • 6.1808.280
    • Adapter for using Port 4 of the 807 dosing Unit for connection with an FEP tubing / M6.
    • <p>Adapter for using Port 4 of the 807 dosing Unit for connection with an FEP tubing / M6.</p>
    • PCS
    • 1
    • /shared/en/products/6/1835/61835050
    • PEEK sample tube
    • https://s7e5a.scene7.com/is/image/metrohm/61835050?$sq-500$&bfc=on
    • 6.1835.050
    • For sample changers for transferring larger-sized sample volumes, e.g. for brightener determination.
    • For sample changers for transferring larger-sized sample volumes, e.g. for brightener determination.
    • PCS
    • 1
    • /shared/en/products/6/2001/62001070
    • Support stand for Sample Processors
    • https://s7e5a.scene7.com/is/image/metrohm/62001070?$sq-500$&bfc=on
    • 6.2001.070
    • Support stand for Sample Processors, for external titrations and dilutions (IC)
    • Support stand for Sample Processors, for external titrations and dilutions (IC)
    • PCS
    • 1
    • /shared/en/products/6/2057/62057210
    • Holder for Dosino to IC instruments
    • https://s7e5a.scene7.com/is/image/metrohm/62057210?$sq-500$&bfc=on
    • 6.2057.210
    • Mounting part for Dosinos at the IC instrument housing.
    • Mounting part for Dosinos at the IC instrument housing.
    • PCS
    • 1
    • /shared/en/products/6/2061/62061010
    • Bottle holder for Dosinos
    • https://s7e5a.scene7.com/is/image/metrohm/62061010?$sq-500$&bfc=on
    • 6.2061.010
    • Bottle holder for up to two Dosinos, mounted on 1 L reagent bottles.
    • Bottle holder for up to two Dosinos, mounted on 1 L reagent bottles.
    • PCS
    • 1
    • /shared/en/products/6/2104/62104020
    • Electrode cable / 1 m / F
    • https://s7e5a.scene7.com/is/image/metrohm/62104020?$sq-500$&bfc=on
    • 6.2104.020
    • For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).
    • For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).
    • PCS
    • 1
    • /shared/en/products/6/2134/62134040
    • RS-232 DB9 - IBM-PC(DB9) connecting cable
    • https://s7e5a.scene7.com/is/image/metrohm/62134040?$sq-500$&bfc=on
    • 6.2134.040
    • For the Metrohm RS-232 interface - PC connection. For Titrinos, Titrino plus and 756, 831 KF Coulometer, RS-232/USB Box
    • <p>For the Metrohm RS-232 interface - PC connection. For Titrinos, Titrino plus and 756, 831 KF Coulometer, RS-232/USB Box</p>
    • PCS
    • 1
    • /shared/en/products/6/2148/62148050
    • USB/RS-232 Converter for 900 Touch Control
    • https://s7e5a.scene7.com/is/image/metrohm/62148050?$sq-500$&bfc=on
    • 6.2148.050
    • Extends the 900 Touch Control by an RS-232 interface for the connection of e.g. balance. 
    • Extends the 900 Touch Control by&nbsp;an RS-232 interface for the connection of e.g. balance.&nbsp;
    • PCS
    • 2
    • /shared/en/products/6/2151/62151000
    • Cable USB A – mini-DIN 8-pin
    • https://metrohm.scene7.com/is/image/metrohm/62151000?$sq-500$&bfc=on
    • 6.2151.000
    • Controller cable
    • Controller cable
    • PCS
    • 2
    • /shared/en/products/6/2307/62307230
    • Buffer solutions pH 4, 7 and 9
    • https://metrohm.scene7.com/is/image/metrohm/62307230?$sq-500$&bfc=on
    • 6.2307.230
    • Mixed buffer solutions pH 4.00/7.00/9.00 (25 °C) in single use sachets, colourless, box of 3 x 10 x 30 mL
    • Mixed buffer solutions pH 4.00/7.00/9.00 (25 °C) in single use sachets, colourless, box of 3 x 10 x 30 mL
    • PCS
    • 1
    • /shared/en/products/6/2325/62325000
    • pHit kit
    • https://metrohm.scene7.com/is/image/metrohm/62325000?$sq-500$&bfc=on
    • 6.2325.000
    • Maintenance kit for pH electrodes The kit contains:50 mL cleaning solution; 50 mL 3M KCl solution; 50 mL storage solution; 2 Storage vessels; Instructions for use;
    • <p>Maintenance kit for pH electrodes </p><p>The kit contains:</p><ul><li>50 mL cleaning solution</li><li>50 mL&nbsp;3M KCl solution</li><li>50 mL&nbsp;storage solution</li><li>2 Storage vessels</li><li>Instructions for use</li></ul>
    • PCS
    • 1
    • /shared/en/products/6/2327/62327000
    • Electrolyte NH4NO3 1 mol/L (50 mL)
    • https://metrohm.scene7.com/is/image/metrohm/62327000?$sq-500$&bfc=on
    • 6.2327.000
    • Electrolyte solution c(NH4NO3) =1 mol/L (for combined Ca-ISE 6.0510.100)
    • Electrolyte solution c(NH<SUB>4</SUB>NO<SUB>3</SUB>) =1 mol/L (for combined Ca-ISE 6.0510.100)
    • PCS
    • 1
    • /shared/en/products/6/2629/62629000
    • Screw nut to needle holder IC
    • https://s7e5a.scene7.com/is/image/metrohm/62629000?$sq-500$&bfc=on
    • 6.2629.000
    • On Sample Processors
    • On Sample Processors
    • PCS
    • 1
    • /shared/en/products/6/2709/62709090
    • Stopper
    • https://s7e5a.scene7.com/is/image/metrohm/62709090?$sq-500$&bfc=on
    • 6.2709.090
    • PTFE. Used with 6.5613.000 ECO titration equipment
    • PTFE. Used with 6.5613.000 ECO titration equipment
    • PCS
    • 1
    • /shared/en/products/6/2730/62730020
    • Septum stopper
    • https://s7e5a.scene7.com/is/image/metrohm/62730020?$sq-500$&bfc=on
    • 6.2730.020
    • With E.301.0041 O-ring. For 6.1448.010 Septum and 6.1414.030 Titration vessel lid. Used for KF applications.
    • With E.301.0041 O-ring. For 6.1448.010 Septum and 6.1414.030 Titration vessel lid. Used for KF applications.
    • PCS
    • 1
    • /shared/en/products/6/2730/62730030
    • Stopper
    • https://s7e5a.scene7.com/is/image/metrohm/62730030?$sq-500$&bfc=on
    • 6.2730.030
    • Complete with nipple and O-ring. For 6.1414.030 titration vessel lids. For KF instruments, VA measurement stands, VA Computrace and IC Dilution.
    • <p>Complete with nipple and O-ring. For 6.1414.030 titration vessel lids. For KF instruments, VA measurement stands, VA Computrace and IC Dilution.</p>
    • PCS
    • 5
    • /shared/en/products/6/2730/62730060
    • Screw nipple
    • https://s7e5a.scene7.com/is/image/metrohm/62730060?$sq-500$&bfc=on
    • 6.2730.060
    • PCTFE. With M16 thread. Used with 6.5613.000 ECO titration equipment
    • PCTFE. With M16 thread. Used with 6.5613.000 ECO titration equipment
    • PCS
    • 3
    • /shared/en/products/6/2730/62730080
    • Screw nipple
    • https://s7e5a.scene7.com/is/image/metrohm/62730080?$sq-500$&bfc=on
    • 6.2730.080
    • PCTFE. Used with 6.5613.000 ECO titration equipment with 722 Stirrer
    • PCTFE. Used with 6.5613.000 ECO titration equipment with 722 Stirrer
    • PCS
    • 1
    • /shared/en/products/6/2744/62744070
    • Pressure screw short
    • https://metrohm.scene7.com/is/image/metrohm/62744070?$sq-500$&bfc=on
    • 6.2744.070
    • Short version. With UNF 10/32 connection. 5 pieces. For the connection of PEEK capillaries
    • Short version. With UNF 10/32 connection. 5 pieces. For the connection of PEEK capillaries
    • PCS
    • 1
    • /shared/en/products/6/2744/62744080
    • M6 thread / UNF 10/32 adapter
    • https://s7e5a.scene7.com/is/image/metrohm/62744080?$sq-500$&bfc=on
    • 6.2744.080
    • With M6 outer thread. For IC instruments.
    • <p>With M6 outer thread. For IC instruments.</p>
    • PCS
    • 2
    • /shared/en/products/6/2763/62763000
    • Flow-through cell for the 6.0915.100/6.0920.100
    • https://s7e5a.scene7.com/is/image/metrohm/62763000?$sq-500$&bfc=on
    • 6.2763.000
    • Flow-through cell for the 6.0915.100/6.0920.100 5-ring conductivity measuring cell
    • <p>Flow-through cell for the 6.0915.100/6.0920.100 5-ring conductivity measuring cell</p>
    • PCS
    • 1
    • /shared/en/products/6/2832/62832000
    • MSM Rotor A
    • https://s7e5a.scene7.com/is/image/metrohm/62832000_1?$sq-500$&bfc=on
    • 6.2832.000
    • Suppressor rotor for all IC instruments with MSM (Metrohm Suppressor Module)
    • Suppressor rotor for all IC instruments with MSM (Metrohm Suppressor Module)
    • PCS
    • 1
    • /shared/en/products/6/2833/62833020
    • Needle holder 1/8 in. With tubing connection M6
    • https://s7e5a.scene7.com/is/image/metrohm/62833020?$sq-500$&bfc=on
    • 6.2833.020
    • For Sample Processors. For the connection of FEP tubing with M6 connectors
    • For Sample Processors. For the connection of FEP tubing with M6 connectors
    • PCS
    • 1
    • /shared/en/products/6/2842/62842020
    • Adapter sleeve, MSM
    • https://s7e5a.scene7.com/is/image/metrohm/62842020?$sq-500$&bfc=on
    • 6.2842.020
    • Not only the MSM Rotor A but also the MSM-LC Rotor A can be installed in the rotor housing with the aid of the adapter sleeve.
    • <p>Not only the MSM Rotor A but also the MSM-LC Rotor A can be installed in the rotor housing with the aid of the adapter sleeve.</p>
    • PCS
    • 1
    • /shared/en/products/6/3032/63032210
    • 807 Dosing Unit 10 mL
    • https://metrohm.scene7.com/is/image/metrohm/63032210?$sq-500$&bfc=on
    • 6.3032.210
    • 807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 1
    • /shared/en/products/6/3032/63032220
    • 807 Dosing Unit 20 mL
    • https://metrohm.scene7.com/is/image/metrohm/63032220?$sq-500$&bfc=on
    • 6.3032.220
    • 807 Dosing Unit with integrated data chip with 20 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 20 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 2
    • /shared/en/products/6/3032/63032250
    • 807 Dosing Unit 50 mL
    • https://metrohm.scene7.com/is/image/metrohm/63032250?$sq-500$&bfc=on
    • 6.3032.250
    • 807 Dosing Unit with integrated data chip with 50 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 50 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 1
    • /shared/en/products/2/8040/28040010
    • 804 Ti Stand without stand rod
    • https://s7e5a.scene7.com/is/image/metrohm/1556_s?$sq-500$&bfc=on
    • 2.804.0010
    • Titration stand and controller for 802 Stirrer. The 804 Ti Stand together with the optional 802 Stirrer provides an alternative to the magnetic stirrer. Without stand.
    • Titration stand and controller for 802 Stirrer. The 804 Ti Stand together with the optional 802 Stirrer provides an alternative to the magnetic stirrer. Without stand.
    • PCS
    • 1
    • /shared/en/products/6/1432/61432210
    • Sample beaker, clear glass, 75 mL, 1 piece 
    • https://s7e5a.scene7.com/is/image/metrohm/61432210?$sq-500$&bfc=on
    • 6.1432.210
    • Sample beaker, clear glass, 75 mL, suitable for sample racks: 6.2041.340, 6.2041.350, 6.2041.800 and 6.2041.900, 1 piece 
    • <p>Sample beaker, clear glass, 75 mL, suitable for sample racks: 6.2041.340, 6.2041.350, 6.2041.800 and 6.2041.900, 1 piece<br/> </p>
    • PCS
    • 1
    • /shared/en/products/6/1432/61432320
    • Sample beaker, clear glass, 250 mL, 1 piece 
    • https://s7e5a.scene7.com/is/image/metrohm/61432320?$sq-500$&bfc=on
    • 6.1432.320
    • Sample beaker, clear glass, 250 mL, suitable for sample racks: 6.2041.310, 6.2041.400, 6.2041.430, 6.2041.510, 6.2041.820, 6.2068.020 and 6.2068.030, 1 piece 
    • <p>Sample beaker, clear glass, 250 mL, suitable for sample racks: 6.2041.310, 6.2041.400, 6.2041.430, 6.2041.510, 6.2041.820, 6.2068.020 and 6.2068.030, 1 piece<br/> </p>
    • PCS
    • 1
    • /shared/en/products/6/1459/61459300
    • Sample beaker, plastic (PP), 120 mL, 250 pieces 
    • https://s7e5a.scene7.com/is/image/metrohm/61459300?$sq-500$&bfc=on
    • 6.1459.300
    • Sample beaker, plastic (polypropylene, PP), 120 mL, suitable for sample racks: 6.2041.470, 6.2041.840, 6.2041.850, 6.2068.010, 6.2068.020, 6.2068.030, and 6.9920.141, 250 pieces 
    • <p>Sample beaker, plastic (polypropylene, PP), 120 mL, suitable for sample racks: 6.2041.470, 6.2041.840, 6.2041.850, 6.2068.010, 6.2068.020, 6.2068.030, and 6.9920.141, 250 pieces<br/> </p>
    • PCS
    • 1
    • /shared/en/products/6/2041/62041800
    • Sample rack, 100 x 75 mL, (PVC)
    • https://s7e5a.scene7.com/is/image/metrohm/62041800?$sq-500$&bfc=on
    • 6.2041.800
    • Sample rack for 815 Robotic USB Sample Processor XL, 855 Robotic Titrosampler “Basic” suitable for 100 sample beakers. The following sample beakers can be used: 6.1432.210, 6.1459.400.Plastic: Polyvinyl chloride (PVC)
    • <p>Sample rack for 815 Robotic USB Sample Processor XL, 855 Robotic Titrosampler “Basic” suitable for 100 sample beakers. The following sample beakers can be used: 6.1432.210, 6.1459.400.</p><p>Plastic: Polyvinyl chloride (PVC)</p>
    • PCS
    • 1
    • /shared/en/products/6/2041/62041810
    • Sample rack, 34 x 150 mL, (PVC)
    • https://s7e5a.scene7.com/is/image/metrohm/62041810?$sq-500$&bfc=on
    • 6.2041.810
    • Sample rack for 815 Robotic USB Sample Processor XL, 855 Robotic Titrosampler “Basic” suitable for 34 sample beakers. The following sample beakers can be used: 150 mL beaker (tall). Plastic: Polyvinyl chloride (PVC) 
    • <p>Sample rack for 815 Robotic USB Sample Processor XL, 855 Robotic Titrosampler “Basic” suitable for 34 sample beakers. The following sample beakers can be used: 150 mL beaker (tall). </p><p>Plastic: Polyvinyl chloride (PVC)</p><p> </p>
    • PCS
    • 1
    • /shared/en/products/6/2041/62041820
    • Sample rack, 28 x 250 mL, (PVC)
    • https://s7e5a.scene7.com/is/image/metrohm/62041820?$sq-500$&bfc=on
    • 6.2041.820
    • Sample rack for 815 Robotic USB Sample Processor XL, 855 Robotic Titrosampler “Basic” suitable for 28 sample beakers. The following sample beakers can be used: 6.14332.320, 6.1432.323, 6.1453.220, 6.1453.250.Plastic: Polyvinyl chloride (PVC)
    • <p>Sample rack for 815 Robotic USB Sample Processor XL, 855 Robotic Titrosampler “Basic” suitable for 28 sample beakers. The following sample beakers can be used: 6.14332.320, 6.1432.323, 6.1453.220, 6.1453.250.</p><p>Plastic: Polyvinyl chloride (PVC)</p>
    • PCS
    • 1
    • /shared/en/products/6/2041/62041830
    • Sample rack, 28 x 200 mL, (PVC)
    • https://s7e5a.scene7.com/is/image/metrohm/62041830?$sq-500$&bfc=on
    • 6.2041.830
    • Sample rack for 815 Robotic USB Sample Processor XL, 855 Robotic Titrosampler "Basic", suitable for 28 sample beakers. The following sample beaker can be used: 6.1459.310.Plastic: Polyvinyl chloride (PVC)
    • <p>Sample rack for 815 Robotic USB Sample Processor XL, 855 Robotic Titrosampler "Basic", suitable for 28 sample beakers. The following sample beaker can be used: 6.1459.310.</p><p>Plastic: Polyvinyl chloride (PVC)</p>
    • PCS
    • 1
    • /shared/en/products/6/2041/62041840
    • Sample rack, 59 x 120 mL, (PVC)
    • https://s7e5a.scene7.com/is/image/metrohm/62041840?$sq-500$&bfc=on
    • 6.2041.840
    • Sample rack for 815 Robotic USB Sample Processor XL, 855 Robotic Titrosampler "Basic", suitable for 59 sample beakers. The following sample beakers can be used: 6.1459.300, 6.1459.307.Plastic: Polyvinyl chloride (PVC)
    • <p>Sample rack for 815 Robotic USB Sample Processor XL, 855 Robotic Titrosampler "Basic", suitable for 59 sample beakers. The following sample beakers can be used: 6.1459.300, 6.1459.307.</p><p>Plastic: Polyvinyl chloride (PVC)</p>
    • PCS
    • 1