Main module Pick&Place M

2.1011.0010

This product has been discontinued, but is still supported.

Go to replacement product

- /shared/en/products/6/0270/602706000
- Cable cover for Sample Robot
- https://s7e5a.scene7.com/is/image/metrohm/602706000?$sq-500$&bfc=on
- 6.02706.000
- The cable cover protects the MDL and Ethernet cables connectors on the OMNIS Sample Robot.
- The cable cover protects the MDL and Ethernet cables connectors on the OMNIS Sample Robot.
- PCS
- 1
- /shared/en/products/1/1011/110110020
- Main module Pick&Place M
- https://s7e5a.scene7.com/is/image/metrohm/4286?$sq-500$&bfc=on
- 1.1011.0020
- Main module for setting up an OMNIS Sample Robot Pick&Place in size M. This module is equipped with the main lift and one gripper. One M/L module base and one rack base are each required to complete the setup. It must be equipped with sample racks, gripper fingers and workstations, e.g., Pick&Place module or a pump module in order to use it to set up a functioning Sample Robot. The selection of these components proceeds in accordance with the application.
- Main module for setting up an OMNIS Sample Robot Pick&Place in size M. This module is equipped with the main lift and one gripper. One M/L module base and one rack base are each required to complete the setup. It must be equipped with sample racks, gripper fingers and workstations, e.g., Pick&Place module or a pump module in order to use it to set up a functioning Sample Robot. The selection of these components proceeds in accordance with the application.
- PCS
- 1
- /shared/en/products/6/0270/602706000
- Cable cover for Sample Robot
- https://s7e5a.scene7.com/is/image/metrohm/602706000?$sq-500$&bfc=on
- 6.02706.000
- The cable cover protects the MDL and Ethernet cables connectors on the OMNIS Sample Robot.
- The cable cover protects the MDL and Ethernet cables connectors on the OMNIS Sample Robot.
- PCS
- 1
- /shared/en/products/2/1014/210140010
- Pick&Place module
- https://s7e5a.scene7.com/is/image/metrohm/4290?$sq-500$&bfc=on
- 2.1014.0010
- Module for installation in the module plate of the Pick&Place of the OMNIS Sample Robot. This workstation takes up the sample beaker for the analysis. Used sensors are cleaned or parked in the storage beaker of the Pick&Place module between analyses. If stirring is required during the analysis, then a separate rod stirrer must be used for this workstation.
- Module for installation in the module plate of the Pick&Place of the OMNIS Sample Robot. This workstation takes up the sample beaker for the analysis. Used sensors are cleaned or parked in the storage beaker of the Pick&Place module between analyses. If stirring is required during the analysis, then a separate rod stirrer must be used for this workstation.
- PCS
- 1
- /shared/en/products/2/1014/210140110
- Pick&Place module with stirrer
- https://s7e5a.scene7.com/is/image/metrohm/4290?$sq-500$&bfc=on
- 2.1014.0110
- Module for installation in the module plate of the Pick&Place of the OMNIS Sample Robot. This workstation takes up the sample beaker for the analysis. The built-in magnetic stirrer makes it possible to analyze samples that were prepared externally on a magnetic agitator directly in the Sample Robot without having to remove the magnetic stirring bar beforehand. Used sensors are cleaned or parked in the storage beaker of the Pick&Place module between analyses.
- Module for installation in the module plate of the Pick&Place of the OMNIS Sample Robot. This workstation takes up the sample beaker for the analysis. The built-in magnetic stirrer makes it possible to analyze samples that were prepared externally on a magnetic agitator directly in the Sample Robot without having to remove the magnetic stirring bar beforehand. Used sensors are cleaned or parked in the storage beaker of the Pick&Place module between analyses.
- PCS
- 1
- /shared/en/products/2/1016/210160010
- Peristaltic (2-channel) pump module
- https://s7e5a.scene7.com/is/image/metrohm/4288?$sq-500$&bfc=on
- 2.1016.0010
- Module for installation in the module plate of the Pick&Place of the OMNIS Sample Robot. This workstation is equipped with both a rinsing pump and an aspiration pump. They are used to clean the sensors in a Pick&Place module and to empty the sample beaker after the analysis before it is returned to the rack once again.
- Module for installation in the module plate of the Pick&Place of the OMNIS Sample Robot. This workstation is equipped with both a rinsing pump and an aspiration pump. They are used to clean the sensors in a Pick&Place module and to empty the sample beaker after the analysis before it is returned to the rack once again. 
- PCS
- 1
- /shared/en/products/2/1016/210160110
- Peristaltic (4-channel) pump module
- https://s7e5a.scene7.com/is/image/metrohm/4289?$sq-500$&bfc=on
- 2.1016.0110
- Module for installation in the module plate of the Pick&Place of the OMNIS Sample Robot. This workstation is equipped with two rinsing pumps and two aspiration pumps each. They are used to clean the sensors in two Pick&Place modules and to empty the sample beaker after the analysis before it is placed back in the rack once again.
- Module for installation in the module plate of the Pick&Place of the OMNIS Sample Robot. This workstation is equipped with two rinsing pumps and two aspiration pumps each. They are used to clean the sensors in two Pick&Place modules and to empty the sample beaker after the analysis before it is placed back in the rack once again.
- PCS
- 1
- /shared/en/products/6/0200/602001010
- Rack base
- https://s7e5a.scene7.com/is/image/metrohm/602001010?$sq-500$&bfc=on
- 6.02001.010
- Rack base for extending the main modules to the OMNIS Sample Robot
- Rack base for extending the main modules to the OMNIS Sample Robot
- PCS
- 1
- /shared/en/products/6/0200/602003010
- Module base M/L
- https://s7e5a.scene7.com/is/image/metrohm/4291?$sq-500$&bfc=on
- 6.02003.010
- Module base for extending the main modules M and L to the OMNIS Sample Robot.
- Module base for extending the main modules M and L to the OMNIS Sample Robot.
- PCS
- 1
- /shared/en/products/6/0204/602041010
- OMNIS sample rack, 9 x 250 mL, (PP)
- https://s7e5a.scene7.com/is/image/metrohm/602041010_1?$sq-500$&bfc=on
- 6.02041.010
- OMNIS sample rack for OMNIS Sample Robot Pick&Place, suitable for 9 sample beakers. The following sample beakers can be used: 6.01400.000, 6.01400.003, 6.01400.100.Plastic: Polypropylene (PP)
- OMNIS sample rack for OMNIS Sample Robot Pick&Place, suitable for 9 sample beakers. The following sample beakers can be used: 6.01400.000, 6.01400.003, 6.01400.100.Plastic: Polypropylene (PP)
- PCS
- 1
- /shared/en/products/6/0204/602041020
- OMNIS sample rack, 9 x 200 mL, (PP)
- https://s7e5a.scene7.com/is/image/metrohm/602041020_1?$sq-500$&bfc=on
- 6.02041.020
- OMNIS sample rack for OMNIS Sample Robot Pick&Place, suitable for 9 sample beakers. The following sample beakers can be used: 6.1459.310.Plastic: Polypropylene (PP)
- OMNIS sample rack for OMNIS Sample Robot Pick&Place, suitable for 9 sample beakers. The following sample beakers can be used: 6.1459.310.Plastic: Polypropylene (PP)
- PCS
- 1
- /shared/en/products/6/0204/602041030
- OMNIS sample rack, 16 x 120 mL, (PP)
- https://s7e5a.scene7.com/is/image/metrohm/602041030_1?$sq-500$&bfc=on
- 6.02041.030
- OMNIS sample rack for OMNIS Sample Robot Pick&Place, suitable for 16 sample beakers. The following sample beakers can be used: 6.01400.200, 6.01400.300, 6.01400.303.Plastic: Polypropylene (PP)
- OMNIS sample rack for OMNIS Sample Robot Pick&Place, suitable for 16 sample beakers. The following sample beakers can be used: 6.01400.200, 6.01400.300, 6.01400.303.Plastic: Polypropylene (PP)
- PCS
- 1
- /shared/en/products/6/0204/602041040
- OMNIS sample rack, 25 x 75 mL, (PP)
- https://s7e5a.scene7.com/is/image/metrohm/602041040_1?$sq-500$&bfc=on
- 6.02041.040
- OMNIS sample rack for OMNIS Sample Robot Pick&Place, suitable for 25 sample beakers. The following sample beakers can be used: 6.01402.000, 6.01402.003, 6.1459.400.Plastic: Polypropylene (PP)
- OMNIS sample rack for OMNIS Sample Robot Pick&Place, suitable for 25 sample beakers. The following sample beakers can be used: 6.01402.000, 6.01402.003, 6.1459.400. Plastic: Polypropylene (PP)
- PCS
- 1
- /shared/en/products/6/0204/602041050
- OMNIS sample rack, 9 x 150 mL, (PP)
- https://s7e5a.scene7.com/is/image/metrohm/602041050_1?$sq-500$&bfc=on
- 6.02041.050
- OMNIS sample rack for OMNIS Sample Robot Pick&Place, suitable for 9 sample beakers. The following sample beakers can be used: 150 mL beaker (tall shape and without spout).Plastic: Polypropylene (PP)
- OMNIS sample rack for OMNIS Sample Robot Pick&Place, suitable for 9 sample beakers. The following sample beakers can be used: 150 mL beaker (tall shape and without spout). Plastic: Polypropylene (PP)
- PCS
- 1
- /shared/en/products/6/0206/602064020
- Retainer for 200 mL sample beaker
- https://s7e5a.scene7.com/is/image/metrohm/602064020?$sq-500$&bfc=on
- 6.02064.020
- Retainer for fixing the 200 mL sample beaker in place in the gripper fingers of the OMNIS Sample Robot Pick&Place.
- Retainer for fixing the 200 mL sample beaker in place in the gripper fingers of the OMNIS Sample Robot Pick&Place.
- PCS
- 1
- /shared/en/products/6/0260/602601010
- Gripper fingers 43 - 65 mm
- https://s7e5a.scene7.com/is/image/metrohm/602601010?$sq-500$&bfc=on
- 6.02601.010
- Gripper fingers for OMNIS Sample Robot Pick&Place for gripping sample beakers with an outer diameter of 43 to 65 mm.
- Gripper fingers for OMNIS Sample Robot Pick&Place for gripping sample beakers with an outer diameter of 43 to 65 mm.
- PCS
- 1
- /shared/en/products/6/0260/602601020
- Gripper fingers 50 - 72 mm
- https://s7e5a.scene7.com/is/image/metrohm/602601020?$sq-500$&bfc=on
- 6.02601.020
- Gripper fingers for OMNIS Sample Robot Pick&Place for gripping sample beakers with an outer diameter of 50 to 72 mm.
- Gripper fingers for OMNIS Sample Robot Pick&Place for gripping sample beakers with an outer diameter of 50 to 72 mm.
- PCS
- 1
- /shared/en/products/6/0260/602601030
- Gripper fingers 48-64 mm
- https://s7e5a.scene7.com/is/image/metrohm/602601030?$sq-500$&bfc=on
- 6.02601.030
- Gripper fingers for OMNIS Pick&Place Sample Robot for gripping sample beakers with an outer diameter of 48 - 64 mm.
- Gripper fingers for OMNIS Pick&Place Sample Robot for gripping sample beakers with an outer diameter of 48 - 64 mm.
- PCS
- 1
- /shared/en/products/6/0260/602601040
- Gripper fingers 28-48 mm
- https://s7e5a.scene7.com/is/image/metrohm/602601040?$sq-500$&bfc=on
- 6.02601.040
- Gripper fingers for OMNIS Sample Robot Pick&Place for gripping sample beakers with an outer diameter of 28 - 48 mm.
- Gripper fingers for OMNIS Sample Robot Pick&Place for gripping sample beakers with an outer diameter of 28 - 48 mm.
- PCS
- 1
- /shared/en/products/6/0270/602700000
- Safety shield for Pick&Place module
- https://s7e5a.scene7.com/is/image/metrohm/602700000?$sq-500$&bfc=on
- 6.02700.000
- Safety shield for Pick&Place modules
- Safety shield for Pick&Place modules
- PCS
- 1
- /shared/en/products/6/0570/605700000
- Consumable Kit OMNIS Gripper
- https://s7e5a.scene7.com/is/image/metrohm/605700000?$sq-500$&bfc=on
- 6.05700.000
- Four slide sleeves and rubber gripper fingers each for replacement on the gripper finger of the OMNIS Sample Robot.
- Four slide sleeves and rubber gripper fingers each for replacement on the gripper finger of the OMNIS Sample Robot.
- PCS
- 1
- /shared/en/products/6/0570/605700250
- Consumable Kit OMNIS Gripper for 6.02601.030
- https://s7e5a.scene7.com/is/image/metrohm/605700250?$sq-500$&bfc=on
- 6.05700.250
- Four rubber gripper fingers for replacement on the gripper finger of the OMNIS Sample Robot.
- Four rubber gripper fingers for replacement on the gripper finger of the OMNIS Sample Robot.
- PCS
- 1
- /shared/en/products/6/0580/605800020
- Upgrade Sample Robot M to L
- https://metrohm.scene7.com/is/image/metrohm/605800020?$sq-500$&bfc=on
- 6.05800.020
- The set contains all of the components required for the upgrade of an already existing OMNIS Sample Robot from size M to size L. Apart from the required rack and module bases, all the required cables, screws, arm extensions as well as the function license are included.
- The set contains all of the components required for the upgrade of an already existing OMNIS Sample Robot from size M to size L. Apart from the required rack and module bases, all the required cables, screws, arm extensions as well as the function license are included.
- PCS
- 1