Sie wurden zu Ihrer lokalen Version der angefragten Seite umgeleitet
Angebot anfordern

Multi-Mode Electrode pro (MME pro) für den 884 Professional VA

de

Erfahren Sie alles über die Installation und Wartung Ihrer Multi-Mode-Elektrode (MME) pro mit dem 884 Professional VA.

Erfahren Sie alles über die Installation und Wartung Ihrer Multi-Mode-Elektrode pro mit dem 884 Professional VA.

Wählen Sie, ob Sie die Elektrode in Betrieb nehmen oder eine vollständige oder teilweise Wartung durchführen möchten. Klicken Sie auf den entsprechenden Abschnitt unten, um ihn zu öffnen.

Hier erfahren Sie Schritt für Schritt, wie eine neue MME pro in Betrieb genommen wird.

Zur Inbetriebnahme der MME pro sind folgende Schritte erforderlich:

Inserting the needle

This video shows how to:

  • Remove the needle holder from the electrode.
  • Unpack the new needle and insert it into the needle holder.
  • Insert the needle holder with the new needle into the electrode.

Inserting the capillary

This video shows how to:

  • Loosen the retaining screw.
  • Unpack the new capillary and insert it into the electrode.
  • Fix the capillary in the electrode.

Filling with mercury

The tasks shown in this video must always be carried out with the plastic tray underneath!

This video shows how to:

  • Open the mercury reservoir of the electrode.
  • Transfer mercury into the electrode using a syringe with a hollow needle.
  • Close the mercury reservoir of the electrode.

Adjusting the needle valve

This video shows how to:

  • Adjust the electrode in 4 steps (principle).
  • Insert the electrode into the measuring head of the 884 Professional VA.

 

  1. Fill the capillary with mercury (1st step).
  2. Adjust the needle valve coarsely (2nd step).
  3. Adjust the needle valve precisely (3rd step).
  4. Complete the needle adjustment (4th step).

Testing the electrode function

Dropping Mercury Electrode (DME)

This video shows:

  • The principle of the electrode operating mode «DME».
  • How to test the electrode operating mode «DME» in the measuring stand.

Static Mercury Drop Electrode (SMDE)

This video shows:

  • The principle of the electrode operating mode «SMDE».
  • How to test the electrode operating mode «SMDE» in the measuring stand.

Hanging Mercury Drop Electrode (HMDE)

This video shows:

  • The principle of the electrode operating mode «HMDE».
  • How to test the electrode operating mode «HMDE» in the measuring stand.

Here you will learn what is to be done if only the level of mercury needs to be increased, without replacing needle and/or capillary.

The following is required to top up mercury:

The tasks shown in this video must always be carried out with the plastic tray underneath!

This video shows how to:

  • Open the mercury reservoir of the electrode.
  • Transfer mercury into the electrode using a syringe with a hollow needle.
  • Close the mercury reservoir of the electrode.

Here you will learn what is to be done when only the capillary needs to be replaced, without additionally replacing the needle.

The following is required to replace the capillary:

Replacing the capillary

The tasks shown in this video must always be carried out with the plastic tray underneath!

This video shows how to:

  • Slightly open the needle valve.
  • Loosen the retaining screw and check the capillary for mercury.
  • Remove the capillary.
  • Unpack the new capillary and insert it into the electrode.
  • Fix the capillary in the electrode.

Adjusting the needle valve

This video shows how to:

  • Adjust the electrode in 4 steps (principle).
  • Insert the electrode into the measuring head of the 884 Professional VA.

 

  1. Fill the capillary with mercury (1st step).
  2. Adjust the needle valve coarsely (2nd step).
  3. Adjust the needle valve precisely (3rd step).
  4. Complete the needle adjustment (4th step).

Testing the electrode function

Dropping Mercury Electrode (DME)

This video shows:

  • The principle of the electrode operating mode «DME».
  • How to test the electrode operating mode «DME» in the measuring stand.

Static Mercury Drop Electrode (SMDE)

This video shows:

  • The principle of the electrode operating mode «SMDE».
  • How to test the electrode operating mode «SMDE» in the measuring stand.

Hanging Mercury Drop Electrode (HMDE)

This video shows:

  • The principle of the electrode operating mode «HMDE».
  • How to test the electrode operating mode «HMDE» in the measuring stand.

Here you will learn what is to be done when needle and capillary need to be replaced. When the needle is replaced, the capillary should always be replaced at the same time.

The following is required to replace needle and capillary:

Replacing the capillary

The tasks shown in this video must always be carried out with the plastic tray underneath!

This video shows how to:

  • Slightly open the needle valve.
  • Loosen the retaining screw and check the capillary for mercury.
  • Remove the capillary.
  • Unpack the new capillary and insert it into the electrode.
  • Fix the capillary in the electrode.

Replacing the needle

The tasks shown in this video must always be carried out with the plastic tray underneath!

This video shows how to:

  • Remove the needle holder and the old needle from the electrode.
  • Unpack the new needle and insert it into the needle holder.
  • Insert the needle holder with the new needle into the electrode.

Adjusting the needle valve

This video shows how to:

  • Adjust the electrode in 4 steps (principle).
  • Insert the electrode into the measuring head of the 884 Professional VA.

 

  1. Fill the capillary with mercury (1st step).
  2. Adjust the needle valve coarsely (2nd step).
  3. Adjust the needle valve precisely (3rd step).
  4. Complete the needle adjustment (4th step).

Testing the electrode function

Dropping Mercury Electrode (DME)

This video shows:

  • The principle of the electrode operating mode «DME».
  • How to test the electrode operating mode «DME» in the measuring stand.

Static Mercury Drop Electrode (SMDE)

This video shows:

  • The principle of the electrode operating mode «SMDE».
  • How to test the electrode operating mode «SMDE» in the measuring stand.

Hanging Mercury Drop Electrode (HMDE)

This video shows:

  • The principle of the electrode operating mode «HMDE».
  • How to test the electrode operating mode «HMDE» in the measuring stand.

Small maintenance of the MME pro includes replacing the wear parts (needle and capillary) and topping up mercury.

The following is required to carry out a small maintenance:

Removing the MME pro

This video shows how to:

  • Remove the MME pro from the measuring head.

Replacing the capillary

The tasks shown in this video must always be carried out with the plastic tray underneath!

This video shows how to:

  • Slightly open the needle valve.
  • Loosen the retaining screw and check the capillary for mercury.
  • Remove the capillary.
  • Unpack the new capillary and insert it into the electrode.
  • Fix the capillary in the electrode.

Replacing the needle

The tasks shown in this video must always be carried out with the plastic tray underneath!

This video shows how to:

  • Remove the needle holder and the old needle from the electrode.
  • Unpack the new needle and insert it into the needle holder.
  • Insert the needle holder with the new needle into the electrode.

Topping up mercury

The tasks shown in this video must always be carried out with the plastic tray underneath!

This video shows how to:

  • Open the mercury reservoir of the electrode.
  • Transfer mercury into the electrode using a syringe with a hollow needle.
  • Close the mercury reservoir of the electrode.

Adjusting the needle valve

This video shows how to:

  • Adjust the electrode in 4 steps (principle).
  • Insert the electrode into the measuring head of the 884 Professional VA.

 

  1. Fill the capillary with mercury (1st step).
  2. Adjust the needle valve coarsely (2nd step).
  3. Adjust the needle valve precisely (3rd step).
  4. Complete the needle adjustment (4th step).

Testing the electrode function

Dropping Mercury Electrode (DME)

This video shows:

  • The principle of the electrode operating mode «DME».
  • How to test the electrode operating mode «DME» in the measuring stand.

Static Mercury Drop Electrode (SMDE)

This video shows:

  • The principle of the electrode operating mode «SMDE».
  • How to test the electrode operating mode «SMDE» in the measuring stand.

Hanging Mercury Drop Electrode (HMDE)

This video shows:

  • The principle of the electrode operating mode «HMDE».
  • How to test the electrode operating mode «HMDE» in the measuring stand.

Full maintenance of the MME pro includes disassembling the entire electrode, cleaning the electrode body from inside, replacing the wear parts (needle and capillary) and filling the electrode with mercury.

The following is required to carry out full maintenance:

Removing the MME pro

This video shows how to:

  • Remove the MME pro from the measuring head.

Emptying and cleaning

The tasks shown in this video must always be carried out with the plastic tray underneath!

This video shows how to:

  • Remove the mercury from the electrode.
  • Remove capillary and silicon seal.
  • Remove needle holder and needle.
  • Clean reusable parts.
  • Clean electrode body from inside.

Assembling the MME pro

The tasks shown in this video must always be carried out with the plastic tray underneath!

This video shows how to:

  • Unpack the new capillary and insert it into the electrode together with the silicone seal and retaining screw.
  • Fix the capillary in the electrode.
  • Unpack the new needle and insert it into the needle holder.
  • Insert the needle holder with the new needle into the electrode.
  • Transfer mercury into the electrode using a syringe with a hollow needle.
  • Close the mercury reservoir of the electrode.

Adjusting the needle valve

This video shows how to:

  • Adjust the electrode in 4 steps (principle).
  • Insert the electrode into the measuring head of the 884 Professional VA.

 

  1. Fill the capillary with mercury (1st step).
  2. Adjust the needle valve coarsely (2nd step).
  3. Adjust the needle valve precisely (3rd step).
  4. Complete the needle adjustment (4th step).

Testing the electrode function

Dropping Mercury Electrode (DME)

This video shows:

  • The principle of the electrode operating mode «DME».
  • How to test the electrode operating mode «DME» in the measuring stand.

Static Mercury Drop Electrode (SMDE)

This video shows:

  • The principle of the electrode operating mode «SMDE».
  • How to test the electrode operating mode «SMDE» in the measuring stand.

Hanging Mercury Drop Electrode (HMDE)

This video shows:

  • The principle of the electrode operating mode «HMDE».
  • How to test the electrode operating mode «HMDE» in the measuring stand.

  1. Assembly ring: 6.1247.210
  2. Needle holder for MME pro: 6.1247.140
  3. Needles for MME: 6.1247.020
  4. Electrode body Multi-Mode Electrode pro (MME pro): 6.1246.120
  5. Screw cap for the mercury refill opening: 6.1247.110
  6. Adapter plug contact / screw contact: 6.2112.130
  7. Silicone seal, green for MME pro: 6.1247.150
  8. Wrench for MME: 6.1247.220
  9. Retaining screw for capillary for MME pro: 6.1247.120
  10. Glass capillary: Mercury drop capillary 6.1226.030 or Silanized mercury drop capillary 6.1226.050
  11. Electrode stand for MME pro: 6.2615.130