Du er blevet omdirigeret til din lokale version af den anmodede side

8.000.6021

Water analysis


Summary

A complete tap water analysis includes the determination of the pH value, the alkalinity and the total water hardness. Both the pH measurement and the pH titration by means of a standard pH electrode suffer from several drawbacks. First, the response time of several minutes is too long and, above all, the stirring rate significantly influences the measured pH value. Unlike these standard pH electrodes, the Aquatrode Plus with its special glass membrane guarantees rapid, correct and very precise pH measurements and pH titrations in solutions that have a low ionic strength or are weakly buffered. Total water hardness is ideally determined by a calcium ion-selective electrode (Ca ISE). In a complexometric titration, calcium and magnesium can be simultaneously determined up to a calcium/magnesium ratio of 10:1. Detection limits for both ions are in the range of 0.01 mmol/L.
Kontakt

Metrohm Nordic ApS

Lyskær 3C. 1. th.
2730 Herlev

Kontakt

Find applikationer
Præcisér din søgning

Denne applikation er tagget under

// Water – drinking water, tap water// Beverages – nonalcoholic